Budzu
Well-Known Member
Hi all, I'm hoping someone knows this from going through exactly what I'm going through... I'm missing a couple of the small o-rings which are used inside the plastic disconnect of a liquid side ball lock.
Does anyone know the size? Or a good place to find them?
I am not referring to the orings on the actual posts of the keg.
There are many sizes of quad (square body) orings here:
http://www.smallparts.com/s/16413611?refinementHistory=cross_section_shape%2Ccross_section_shape%2Ccross_section_shape%2Cmeasurement_system%2Cmeasurement_system%2Csubjectbin%2Cmaterial_browse%2Citem_width_derived%2Cbrandtextbin%2Cenc-merchantbin%2Cinside_diameter_derived%2Citem_diameter_derived%2Cavailability%2Creview-rating%2Cdate%2Cis_prime&field_cross_section_shape=Quad&searchKeywords=O-Rings&searchNodeID=16413611&searchRank=salesrank&searchSize=15&searchBinNameList=cross_section_shape%2Ccross_section_shape%2Ccross_section_shape%2Cmeasurement_system%2Cmeasurement_system%2Csubjectbin%2Cmaterial_browse%2Citem_width_derived%2Cbrandtextbin%2Cenc-merchantbin%2Cinside_diameter_derived%2Citem_diameter_derived%2Cavailability%2Creview-rating%2Cdate%2Cis_prime
Thanks, hoping this might help others as well, cheers!
Does anyone know the size? Or a good place to find them?
I am not referring to the orings on the actual posts of the keg.
There are many sizes of quad (square body) orings here:
http://www.smallparts.com/s/16413611?refinementHistory=cross_section_shape%2Ccross_section_shape%2Ccross_section_shape%2Cmeasurement_system%2Cmeasurement_system%2Csubjectbin%2Cmaterial_browse%2Citem_width_derived%2Cbrandtextbin%2Cenc-merchantbin%2Cinside_diameter_derived%2Citem_diameter_derived%2Cavailability%2Creview-rating%2Cdate%2Cis_prime&field_cross_section_shape=Quad&searchKeywords=O-Rings&searchNodeID=16413611&searchRank=salesrank&searchSize=15&searchBinNameList=cross_section_shape%2Ccross_section_shape%2Ccross_section_shape%2Cmeasurement_system%2Cmeasurement_system%2Csubjectbin%2Cmaterial_browse%2Citem_width_derived%2Cbrandtextbin%2Cenc-merchantbin%2Cinside_diameter_derived%2Citem_diameter_derived%2Cavailability%2Creview-rating%2Cdate%2Cis_prime
Thanks, hoping this might help others as well, cheers!