Stout Faucet(euro style) question

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Conodor

Well-Known Member
Joined
Aug 5, 2005
Messages
301
Reaction score
24
Location
The mitten
http://www.beveragefactory.com/draftbeer/faucets/faucets/JESF-4.shtml



I'm upgrading to an 8 tap system. i want 1 euro style faucet. I plan to run this off of normal Co2 until i get some extra funds for beer gas/nitro tank and regulator.


the question is will i be OK for some time using co2 with this style faucet?

thanks!

(if someone can recommend a better one, also please do)


tn375_mm-jesf-4120108092920.jpg
 
Even with the restrictor plate out for non-nitro beer, it foams more than a regular faucet.
I have 2 of them and a couple spare perlick 525's to fill the spots for when I don't have 2 nitro beers to tap. Much less hassle.
You need to rinse the spout after using it, they seem to hold some beer up in there that will dry up and get sticky, unless you use them often.
 
Thanks for the info. i would rarely use it. I guess i should have ordered another 525 earlier today.
 
I have 1 creamer version now, although it's very nice. i don't think it really does much other than add alittle temporary head on a beer. it doesn't stay on the beer for long.

i want to get a traditional euro style faucet and a nitrogen set up.
 
Back
Top