uechikid
Well-Known Member
What size O Rings are used for the in and out nipples on the cornnie kegs?
O Rings
- Thread starter uechikid
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
SumnerH
Well-Known Member
https://www.homebrewtalk.com/f35/keg-o-rings-5754/
O-rings on the ball lock (outside on the connector)
#9 o-ring 5/8 x 7/16 x 3/32
O-rings on the down tubes(inside and underneath the valve assembly)
#83 o-ring 1/2 x 5/16 x 3/32
O-rings on the ball lock (outside on the connector)
#9 o-ring 5/8 x 7/16 x 3/32
O-rings on the down tubes(inside and underneath the valve assembly)
#83 o-ring 1/2 x 5/16 x 3/32
OP
OP
uechikid
Well-Known Member
Thanks. I have that size but it seems hard to find at some hardware stores.
SumnerH
Well-Known Member
Cornie lid o-ring size 417 Common supplier: McMaster-Carr part #9452K218
$12ish for 10: http://www.mcmaster.com/#9452k218/=73864b
Cornie post o-ring size 111 Common supplier: McMaster-Carr part #9452K23
$2ish for 100: http://www.mcmaster.com/#9452k23/=7386b7
Cornie dip tube o-ring size 109 Common supplier: McMaster-Carr part #9452K172
$2ish for 100: http://www.mcmaster.com/#9452k172/=7386mw
OP
OP
uechikid
Well-Known Member
WhooHoo. Thanks a bunch. You just saved me a lot of time.
Yes and they ship supper fast I ordered mine and they arrived a few days later, earlier this week, quick fast, correct and great price!!!
Jud
Well-Known Member
McCarr Masters is great! Next day on your door steps!!!
OP
OP
uechikid
Well-Known Member
At those prices I could change O Rings every time I use a keg.
