WRNK-171 Auber K Thermocouple with 1/4" compression?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

splobucket

Well-Known Member
Joined
Oct 6, 2009
Messages
95
Reaction score
4
Location
Orlando
I'm upgrading my mash tun to a keg, so I have to upgrade a few fittings as well. I own the WRNK-171 thermocouple and would like to use a 1/4" compression like this... But the thermocouple is 5/32" in diameter. Has anyone used this specific thermocouple with a 1/4" compression fitting?/32" in diameter. Has anyone used this specific thermocouple with a 1/4" compression fitting? I've searched the forum and no one has addressed this specifically.
 
Thanks for the help from Darrin at Brewer's Hardware, I answered my own question...

If you own one of these...

And buy one of these...

You also need two of these!
 
Back
Top