Dupell13
Active Member
I have read countless threads and now I have contacted the company with no luck. I really need some advice on which burner to use for low pressure propane. I am not confused on the pressures. I fully understand the 11" water column or .5 psi for low pressure. 1)What I would like to know is who uses the 23 tip jet burners for this application and more specifically what are the size of the jet orifice for low pressure application.
I bought one from Thunder group and they could not tell me if it could be used for LP LP or what the orifice size are. I tried on low pressure and it seems like it works well but its a beast on high. Is there a difference in the sizes? When on low pressure I had a little yellow in the tips and it left no soot behind.
Next question is I have the Blichmann floor burner and wanted to convert that to low pressure. I drilled out the jet 3/32 but get a really yellow flame that leaves a lot of soot behind. Should I fill the whole and go smaller? I have looked at the chart that compares (Low Pressure Orifice Chart) orifice to BTU output. Is it better to start small and work my way up? Also this burner has been used for high pressure many times so I don't think it's burning any paint/oil off.
Thanks ahead of time for some help.
I bought one from Thunder group and they could not tell me if it could be used for LP LP or what the orifice size are. I tried on low pressure and it seems like it works well but its a beast on high. Is there a difference in the sizes? When on low pressure I had a little yellow in the tips and it left no soot behind.
Next question is I have the Blichmann floor burner and wanted to convert that to low pressure. I drilled out the jet 3/32 but get a really yellow flame that leaves a lot of soot behind. Should I fill the whole and go smaller? I have looked at the chart that compares (Low Pressure Orifice Chart) orifice to BTU output. Is it better to start small and work my way up? Also this burner has been used for high pressure many times so I don't think it's burning any paint/oil off.
Thanks ahead of time for some help.