I've changed my setup a few times in the last few years, so here's some stuff I no longer use. I can do drop off in the Omaha/Lincoln area, or I can mail it, you pay actual cost of shipping.
sold -->>>> 2 - 5 gallon Carboys, each with handle $25 each
1 - 6.5 gallon Carboy, with handle $35
5 igloo MLT, with SS mesh, plus CPVC manifold. I used the mesh for batch and manifold for fly. You can completely take apart this CPVC valve, unlike the ball valve version. There are male/female threads before the valve, so you can take that apart as well. And I've shot a the lid full of foam sealant. Keeps temp to within 1 degree for 90 minutes. $35
A corona style grain mill, with a hopper made from a plastic jug. Works great. Not sure how the picture got turned upside down. $35
And a collection of assorted parts
-Floating thermometer $3
-Stopper thermowell $15
-Rubber carboy hood $3
-Little hop weigher free to whoever buys something else and wants it
-4" long 1/2" SS nipple $4
-Homemade bulkhead, all copper/SS. It's a SS washer soldered to some copper fittings with a silicone washer. Works great, I used it on a Igloo cooler, but have the same style on a sanke keg I still use. $7
sold -->>>> 2 - 5 gallon Carboys, each with handle $25 each
1 - 6.5 gallon Carboy, with handle $35
5 igloo MLT, with SS mesh, plus CPVC manifold. I used the mesh for batch and manifold for fly. You can completely take apart this CPVC valve, unlike the ball valve version. There are male/female threads before the valve, so you can take that apart as well. And I've shot a the lid full of foam sealant. Keeps temp to within 1 degree for 90 minutes. $35
A corona style grain mill, with a hopper made from a plastic jug. Works great. Not sure how the picture got turned upside down. $35
And a collection of assorted parts
-Floating thermometer $3
-Stopper thermowell $15
-Rubber carboy hood $3
-Little hop weigher free to whoever buys something else and wants it
-4" long 1/2" SS nipple $4
-Homemade bulkhead, all copper/SS. It's a SS washer soldered to some copper fittings with a silicone washer. Works great, I used it on a Igloo cooler, but have the same style on a sanke keg I still use. $7