Nitrogen tank/regulator for CO2 use

rdkopp0153 · Jan 22, 2013

Hi,
Getting started on my kegging project and trying to piece together equipment. A nitrogen tank and nitrogen regulator is no longer in use and available at where I work. Is it possible to use these pieces of equipment for a CO2 setup? Or because I have these two free pieces, is it best to do a beergas setup?
If I can convert, what pieces of new equipment do I need?
Thanks for the help

beaksnbeer · Jan 22, 2013

Yes, you can you would need either a CGA-320 off the regulator and a swap the tank for a CO2 tank. But you could sell/trade for what you need a Nitrogen regulator and tank in my opinion are worth more then changing it to a CO2 set-up.

rdkopp0153 · Jan 22, 2013

So it looks like I need a CGA-580 on the regulator and the CGA-320 going to the (swapped) CO2 tank.

http://www.beveragefactory.com/draftbeer/tanks/adapters/nitrogen_regulator_co2_tank_adapter.shtml

Thanks for pointing me in the right direction.

Nitrogen tank/regulator for CO2 use

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

rdkopp0153

Well-Known Member

beaksnbeer

Supporting Member

rdkopp0153

Well-Known Member

Similar threads

Latest posts

Nitrogen tank/regulator for CO2 use

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

rdkopp0153

Well-Known Member

beaksnbeer

Supporting Member

rdkopp0153

Well-Known Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!