• Back to List
  • Previous
  • Next
2937-2689

"My BK, HLT, And MT........all 40 Gal And DIY Ball Valves, Dip Tubes, Manifold....etc. I Insulated The MT With R-15 Fiberglass Insulation And Duck Tape. I Lose 1 Degree Per Hour, Probably Because Of The Lid Not Having A Seal And The Fact That I Had To Le"

By:

  • My BK, HLT, and MT........all 40 gal and DIY ball valves, dip tubes, manifold....etc. I insulated the MT with R-15 fiberglass insulation and duck tape. I lose 1 degree per hour, probably because of the lid not having a seal and the fact that I had to leave some of the pot un-insulated near the ball valve and brewmometer. The pots were advertised as 45 gallon when I bought them, but they ended up only being 40 gallon. Not cool at all...... I'm makin it work. I barely have enough headspace in the MT and I ended up being short on the BK by about 2 gallons. I use pressure canned makeup water to top off after the boil so that I can pump out a full BBL when I brew as originally planned. Could be worse. I could drop to 25 gallon batches........but that takes all the fun out of it. The burner stands are all DIY too BTW.
    DESCRIPTION:
  • 2937-2689.jpg
    PHOTO NAME:
  • 365
    VIEWS:
  • UPLOADED ON:
  • 600
    ORIG. WIDTH:
  • 450
    ORIG. HEIGHT:
  • Canon EOS REBEL T1i
    CAMERA:
  • 1/60
    SHUTTER SPEED:
  • f/1
    APERTURE:
  • 0.0 mm
    FOCAL LENGTH:
  • 400
    ISO SPEED:
0 COMMENTS
POST A COMMENT