P Pump Arms. Before modification.
P Pump Arms Cut down to size.
P Pump Test Fit arm spindle into housing.
P Pump finished
P Pump inner wood pieces. Cut using jig saw and router.
P Pump center pieces with slot removed for hose entry and exit.
P Pump housing assembly. Note the channels for hose entry/ exit.
P Pump Outer plate assembly. Hole in outer plate is cut 1/8" smaller to keep hose confined.
P Pump Assemble 4
P Pump Back side where motor connects to pump. Belt driven.
P Pump Side view of back plate with arms mounted.
P Pump Motor. Geared down from 1460 to 45 RPM.
Pump in action. Pumps 1 Gal./Min. at 45 RPM. through 3/8 tubing. Pumping from boil kettle through pump, through 25Ft. pre-chiller, through Shirron plate chiller, into fermenter. 212F to 60F.