Gift Premium Subscription To zoso

Join Date:


Last Activity:

07-16-2015 12:07 AM


  • Single
  • West Sacramento
  • CA


  • Posted in thread: Sanke Keg Washer build on 10-22-2013 at 06:29 PM
    For me/us it's not that it's hard to design or build something like this (or copy this), it's
    that you just run out of time focusing on other aspects of the brewery while using a just good
    enough, not...

  • Posted in thread: Sanke Keg Washer build on 10-21-2013 at 11:28 PM
    I own a 3bbl nano and it's a big leap to get even the cheapest keg washer on the market. Would
    be awesome if someone took this and could make a keg washer for significantly less than $5k

  • Posted in thread: NanoBrewery build on 01-03-2013 at 11:21 PM
    I'm working on a Nano down in San Diego. I know a lot if people down here. Including Mike Hess
    and some other owners. There are no laws saying that you cannot have chairs or tables. However
    it can be ...

  • Posted in thread: how to make a carbonator cap for a glass demijohn? on 02-20-2012 at 04:47 PM
    This might be what you've seen do make locking tire chucks that you could adapt, but that
    might leak.You could also buy some spare caps, drill a hole in them and hook up a barb thought
    the cap and j...

  • Posted in thread: counter flow time savings? on 02-12-2012 at 03:35 PM
    Immersion with a whirlpool recirc is pretty quick, I don't see a counter flow being much
    better. What I do (especially in the summer) is run a splitter off the hose bib and run an
    immersion with the "...

  • Posted in thread: HopRocket,chiller plate, sanitary clamp up grade on 01-13-2012 at 04:33 AM
    cool. I never would have thought there was enough suction there to pull that A) through the PC,
    but B) through the rocket before the PC as well. Glad to see it works!The kettle out might be
    the same h...

  • Posted in thread: Can I upgrade typical march pump to HF? on 09-30-2011 at 05:20 AM
    Walter are you still monitoring this? I took apart my pump head and found that I already had
    the larger impeller. My motor says 3,500 RPM and is a HS model. So what is the difference
    between my pump a...