Last Activity:07-23-2011 10:26 AM
1 Likes on 1 Posts
Posted in thread: Kegerator Conversion - Frigidair Mini on 05-20-2010 at 05:09 PM
Dave, would you mind posting what kind of fridge you used? It looks like you have room for two
5gal kegs in there, am I right?
Posted in thread: Rough Draft Logo on 04-12-2010 at 02:32 AM
I just bottled my 3rd batch and figured now was a good time to make a logo. I am however not
very creative nor do I have photoshop. I made a VERY rough draft in powerpoint. If anyone more
Posted in thread: Beer Bender Project on 04-03-2010 at 10:25 PM
Posted in thread: DIY Thief Help on 03-29-2010 at 02:12 PM
Why don't you just make something similar to a ladle? Example: cut an 8" piece of 1/2" diameter
copper pipe and attach a cap to one end. Then attach a lengthy thin rod to the side of it so
you can dro...
Posted in thread: Wort sloshing on 03-16-2010 at 10:48 PM
OK. You can set it in manual mode then, set the period of the thing for something like 5
seconds (or whatever you want) and tell the PID to have the element on for "whatever" % of that
time.That will ...
Posted in thread: Auber SYL-2352 PID & RTD Questions on 03-16-2010 at 08:44 PM
I am unsure on the RTD as I have a thermocouple. I did have to change my input offset "pb" to
read the proper temperature as it was off just like the post above. The only thing I didn't
like was the t...
Posted in thread: Auber SYL-2352 PID & RTD Questions on 03-16-2010 at 06:22 PM
I too am interesting in the posted questions. As far as the second question goes, I had to set
my PID to recognize the temperature read from the RTD as 6*F warmer than actual temperature. In
Posted in thread: Wort sloshing on 03-16-2010 at 06:16 PM
does your PID support "manual mode"?Yes it does. It is an Auber SYL PID.
Posted in thread: Wort sloshing on 03-16-2010 at 12:17 AM
Thanks for the speedy reply. I ended up doing the whole boil with my PID on auto mode with it
set at 210* and I'm just hoping everything turned out all right. Set at 210* it boiled the
water about for...
Posted in thread: Wort sloshing on 03-15-2010 at 08:39 PM
I'm currently brewing my first batch in my newly built e-kettle. I have a single heating
element set up along the diameter of my kettle. I'm boiling 3 gallons of wort in a 6 gallon
kettle. The boiling...