Last Activity:08-30-2015 1:46 PM
Age:29 years old
Likes Given: 26
229 Likes on 162 Posts
Posted in thread: You know you're a home brewer when? on 08-30-2015 at 01:44 PM
Probably been said before, but...When you see a party scene in movie/TV and see their pump keg
setup. Then realize that your day to day home dispensing system is better than that "awesome
Posted in thread: Up **** creek without a regulator? on 08-26-2015 at 10:07 AM
One of my regulators takes a good long while to have the needle adjust. But it does given some
time. Learned with that one to give it a 1/2 turn on the knob, then walk away and come back
hours later. ...
Posted in thread: Help with keezer collar design on 08-21-2015 at 12:29 PM
I used stained + varathaned 2x10. It still clashes with the white, but at least it's sealed.
Couple beads of silicone to seal with the freezer body, and have faith in the lid seal on the
wood.Since I ...
Posted in thread: Can you re keg a beer? on 08-21-2015 at 10:24 AM
I'll probably be doing this shortly myself. Impatience led to not cold crashing, and the first
few pours were filthy. Then I started pouring pure foam from the tap. Cleaned out the lines
Posted in thread: So, what's all the hubbub about? on 08-16-2015 at 12:18 PM
That link returns a 404 error.It wasnt dead 6 months ago...That's what I thought. Seems the
forum added a "t=" to the url for some reason between then and now. That is probably going to
mean that many...
Posted in thread: Worst Songs for a Lap Dance on 08-03-2015 at 12:36 PM
"Young Girl" - Gary Puckett and the Union Gap./thread
Posted in thread: HomeBrewSupply Amcyl Brew Kettle w/ 3-Piece Ball Valve Giveaway! on 07-30-2015 at 10:12 AM
Hook me up!
Posted in thread: This is huge for us Lager brewers... on 07-26-2015 at 10:54 PM
Here I was hoping that it was:"Science has created clean tasting, well floccing lager yeast
that works at 20C (72F)"Hopes and dreams, always shattered.
Posted in thread: Perfect first pour of the day...head 5min later on 07-26-2015 at 10:51 PM
I have on occasion had a great pour on my first pint, and utter failure on the second. I was
using the same glass - lacing on the glass seems to have created nucleation points for future
Posted in thread: Control Panel - ABS - how to cut holes best on 07-26-2015 at 10:45 PM
I used a saw-toothed blade for a dremel that came with a 300 piece kit. Seemed like a good
opportunity to try it out. Worked well. Not a ton of dust and just as easy to control as one of
the standard ...