Last Activity:08-10-2015 3:12 PM
Likes Given: 1
13 Likes on 5 Posts
Posted in thread: Another EBIAB journey on 05-13-2015 at 05:26 AM
You will have to check your wiring to see whether you have H-H-N or H-H-G. Someone may be able
to chime in the best way to test this, but basically you need to determine whether the wire in
Posted in thread: Another EBIAB journey on 03-29-2015 at 04:29 PM
Just got back from a week out in the field.Before I left I pulled the machine fuses out of the
box.Also noticed that it is rated for 30A, but this is 3phase, will the switch be able to
handle 50A sing...
Posted in thread: Another EBIAB journey on 03-18-2015 at 03:30 AM
Thanks guys! I might get started on the spa panel portion this week.A 3 wire dryer outlet is
likely H-H-N. A pure 240v element would be fed with H-H-G. If that is your scenario, then wire
the spa pane...
Posted in thread: Another EBIAB journey on 03-15-2015 at 10:22 PM
It looks like i just found my answer deep within the E-Primer Stickey.Either this or just run a
ground and get a new 4 wire receptacle on the outlet with ground going back to the main panel
which is j...
Posted in thread: Another EBIAB journey on 03-15-2015 at 09:33 PM
This is the location of the other panel and plug in a different building.It should be fairly
easy to switch out for GFIC and add a ground correct?Plug is right below main box there.Looks
like the brea...
Posted in thread: Another EBIAB journey on 03-15-2015 at 08:47 PM
Well it seems that I jumped the gun a little.I have already started to build the kettle, and
have ordered parts.Last night I decided to make sure that the main service plugs were correct.I
Posted in thread: Another EBIAB journey on 03-06-2015 at 12:51 AM
I was going to avoid this at first, because I want to use my current IC and whirlpool, but then
If found this, and now it looks like ill be a bottom drainer!
Posted in thread: Another EBIAB journey on 03-05-2015 at 03:37 AM
Picked up a Keg this morning, I suppose I should have looked closer at it before hefting it to
my car... Going to try and go back tomorrow and switch it out.
Posted in thread: Another EBIAB journey on 02-23-2015 at 07:09 AM
Yes another EBIAB build.I have been extract brewing for almost 4 years now and I think its time
to take the jump to Allgrain. To make things 'simpler' ill use a BIAB system (that i build) to
Posted in thread: Possible Electric build with silicone heat mats on 02-17-2015 at 07:26 AM
Would the heat source coming from the sides change the physics of the boil?I participated in a
yeast experiment with a local brewery. They brewed, gave us a 5.5 gallon keg and a different
white labs y...