VIEW MY

yjfun

Gift Premium Subscription To yjfun

Join Date:

06-12-2010

Last Activity:

01-29-2014 5:41 PM

2 Likes on 2 Posts 

    ABOUT ME

  • BREW
  • Summer Breeeze Kolsch
    Frenchie Saison
    Summer Finale Oktoberfest
  • Headknocker Red IPA
    Spring Fever ESB
    Iron Wheat Dunkelweizen
  • Maibock
    Headknocker Red IPA
    Spring Fever ESB
  • Male
  • Married
  • Arlington
  • Washington

LATEST ACTIVITY

  • Posted in thread: 240v ssr on 120v build? on 01-11-2013 at 09:42 PM
    No problems that I can think of. Those are just rated to break a circuit with a voltage up to
    240.

  • Posted in thread: 20 amp 240v GFCI outlet? on 11-29-2012 at 04:22 PM
    The way I look at it is 1: That I can't impose greater than a 19 amp load on the wire2: The
    wire can actually handle 30 amps3: Everything is protected by a 20 amp fuse4: The fuse would
    blow in the cas...

  • Posted in thread: 20 amp 240v GFCI outlet? on 11-28-2012 at 11:56 PM
    ryane,You need to take a look in your code book. It's not legal to land a number 12 wire under
    a 30 amp breaker in most situations but number 12 THHN is physically rated to handle a 30 amp
    load so the...

  • Posted in thread: 20 amp 240v GFCI outlet? on 11-28-2012 at 09:09 PM
    Thank you DustBow.

  • Posted in thread: 20 amp 240v GFCI outlet? on 11-28-2012 at 07:33 PM
    Did you not read that I fused down to 20 amps in the controller?

  • Posted in thread: 20 amp 240v GFCI outlet? on 11-28-2012 at 05:36 PM
    NEC Article 100 states that a continuous load is 3 hours or more. Seeing as I don't do 3 hour
    boils it's perfectly safe and legal.

  • Posted in thread: Can I Directly Wire 50 A Into Electric Control Panel on 10-12-2012 at 02:46 PM
    Hardwiring is perfectly acceptable but cord and cap allows for easy disconnection if you want
    to move anything and provides a physical disconnection point for safety.

  • Posted in thread: Who to hire to build my system? on 10-12-2012 at 02:32 PM
    Look for a specialty electrical shop in your area. Electricians no longer build controllers on
    site anymore so a lot of them don't know how. We usually have to order them up. If you can find
    out who b...

  • Posted in thread: Help wiring my contactors on 09-26-2012 at 12:55 AM
    not on your coil

  • Posted in thread: What 220V element for welded lock nut keggle? on 07-14-2012 at 08:01 PM
    I do 12 gallon boils in a keggle with the 4500 watt element. 90% to reach boil and then 30-60%
    power to maintain a vigorous rolling boil depending on outside temp and wind. I usually aim for
    a 1-1.5 g...

0 COMMENTS
POST A COMMENT