VIEW MY

xxllmm4

Gift Premium Subscription To xxllmm4

Join Date:

02-19-2012

Last Activity:

12-10-2012 1:53 AM

    ABOUT ME

  • Single
  • Portland
  • OR-Oregon

LATEST ACTIVITY

  • Posted in thread: Looking for something akin to a Port Wine beer on 03-09-2012 at 09:15 PM
    Hey everyone,I'm looking for some help input coming up with a recipe for my next big beer. I am
    looking for something akin to a Port wine. With low hop bitterness. This is what the idea so
    far for a 5...

  • Posted in thread: Looking for something beer safe and magnetic. on 02-23-2012 at 12:34 AM
    430 stainless would probably work, how corrosion resistant does it need to be? If its just for
    a stir stick you might be able to bend a piece of sheet, check out ebay for 430, you can buy
    scrap pieces...

  • Posted in thread: Critique my Lemon Ginger Beer on 02-22-2012 at 07:39 AM
    Sounds good to me. I think another good option for the hops would be Pacifica. Personally I
    would up the ginger to 2-3 ounces and dry hop it lightly. What kind of yeast?

  • Posted in thread: 1/2" wort chiller from straight copper pipe? on 02-22-2012 at 07:13 AM
    Ok, the results are in on test #1 keep in mind this was done with water, not wort. I think
    chillers work better in wort? I started out by testing my flow rate off my faucet.Water temp
    48F1.4gpm open f...

  • Posted in thread: 1/2" wort chiller from straight copper pipe? on 02-21-2012 at 07:05 PM
    "Trying to visualize the dynamics of this split method. I have nothing to back it up, but what
    I'm seeing is water taking the path of least resistance and mostly going through only one side
    of the chi...

  • Posted in thread: 1/2" wort chiller from straight copper pipe? on 02-21-2012 at 10:11 AM
    I haven't had a chance to run it yet. I need to pick up some 1/2 tube and an adapter for my
    faucet. I don't think it would matter what way you run it but I will probably boil up some
    water in the next...

  • Posted in thread: 1/2" wort chiller from straight copper pipe? on 02-21-2012 at 09:53 AM
    Well I figured I would just go ahead and do it. It cost me about $10 since I had the pipe, a
    couple fittings, the flux and solder. So this is whats in it.1/2" X 19' copper pipe schedule
    M20 elbows2 Te...

  • Posted in thread: 1/2" wort chiller from straight copper pipe? on 02-20-2012 at 03:47 AM
    Hey everyone,Well I think its about time I made a wort chiller. I have been brewing off and on
    for about 20 years now. Anyway I was thinking of making a wort chiller from 1/2 straight pipe
    (not the so...

0 COMMENTS
POST A COMMENT