Last Activity:11-01-2013 6:39 AM
Age:28 years old
Posted in thread: Danby DAR125SLDD Kegerator Build on 11-22-2012 at 12:37 PM
The door panel super easy. Just be careful not to tear the rubber door seal and you'll be fine.
My only issue with the door was the clear acrylic sheet I used. it's really brittle, so make
sure you pr...
Posted in thread: Danby DAR125SLDD Kegerator Build on 11-21-2012 at 01:38 PM
It went well, though I should have test-driven my work. Turns out I forgot to put back the
plastic top before measuring the length of the screws I needed. I'll have to go back to the
store to get long...
Posted in thread: Danby DAR125SLDD Kegerator Build on 11-14-2012 at 01:58 PM
Hi everyone!So I'm about to start the irreversible part of the build and I would just like to
confirm something. I've got the DAR125SLDD and after the cornstarch test, it would seem like
there's no re...
Posted in thread: Arduino controlled fermentation chamber on 07-06-2012 at 12:49 PM
HiHow much cooling do you need to do? Are you 10F to hot or 50F?BobRoughly about 5-10F off, so
I'm assuming that peltier powered should be sufficient, but I have seen a lot of setup that
Posted in thread: Arduino controlled fermentation chamber on 07-04-2012 at 07:22 PM
I was wondering if you managed to resolve your issue with keeping the temperature low.
Apparently my `cold-room` is not as cold in the summer and I need to make myself something
similar in order to ke...
Posted in thread: Greetings from Blainville, QC! on 01-18-2012 at 07:37 PM
Thanks for the tip :)Now, I need to figure out a valid reason to head out to Joliette other
than beer... My wife would probably not agree if it's "just" beer
Posted in thread: Greetings from Blainville, QC! on 01-17-2012 at 10:19 PM
Hey everyone!I'm a short time lurker and recently joined! I've already taken a few tips here
and honestly, this is the best website find in a long while for me.I'm not an experienced
brewer (I've got ...
Posted in thread: $6.99 Drill Operated Cayboy Cleaner on 01-11-2012 at 02:37 AM
Just finished building mine based on the last design. Works beautifully! Happy to have seen
this as I started cleaning my first brew's first fermenter!It just goes to show that the
experience of other...