Last Activity:11-07-2014 8:45 PM
1 Likes on 1 Posts
Posted in thread: uKeg growler on 11-04-2014 at 10:26 PM
I've been looking for a long time for a portable kegging setup so I backed this project for the
128oz version. I had been eyeing the tap a draft or party pig but they seemed to have too many
Posted in thread: Natural Priming in a Keg on 11-14-2011 at 07:55 PM
I've only keg conditioned one keg so far (doing another one tonight though), but I found that
the force carbed beers are crystal clear where as the conditioned one was always a bit cloudy.
Of course i...
Posted in thread: Are these cheap perlick faucets the right kind? on 10-29-2011 at 07:00 PM
I use the chrome Perlicks. They look and work awesome.
Posted in thread: Is my beer line too short? on 10-18-2011 at 08:03 PM
I emailed the people at Keg Connection and this is what they said, now I am even more
confused:So if Todd is right, how come I get a good glass of beer at 4 psi, and foamy nothing
at 12 psi??I have a ...
Posted in thread: Kegging question on 10-13-2011 at 05:57 PM
They are advising you to bleed pressure in your keg so you are not pushing beer into your
regulator. If you have a keg that's at 16psi, and you set your regulator to 10psi and hook it
up, the higher p...
Posted in thread: Twist off bottles on 10-09-2011 at 07:05 PM
If you have a bench capper you can put normal caps on those twist off bottles. I have bottled
over 1000 beers in them and have only had 2 that didn't carbonate, and only because those
bottles were dam...
Posted in thread: CO2 Leaks/Where the is keg connection?!? on 09-23-2011 at 04:55 PM
One thing you may have missed is on the CO2 tank you either need to have the valve fully closed
or fully open. If you have it open only half way it can be a source of a leak.
Posted in thread: Just pulled the trigger... Did I do ok? on 09-14-2011 at 06:33 PM
My order in early August came super fast, but my order in late August took a while to be
shipped (5 or 6 business days + transit time). But they do have amazing prices and great
quality stuff. Maybe t...
Posted in thread: ebay aquarium temp controller build on 09-02-2011 at 08:53 PM
For people who have built everything into a box, what did you do for strain relief on the main
power cord and temperature probe cable?Cable clamp, used for installing electrical cable
through breaker ...
Posted in thread: Diy co2 on 09-02-2011 at 08:39 PM
Not sure why you would want to do this. It's $21 for me to fill my 5lb co2 tank, which in
reading on here is actually pretty relatively expensive, but even so it works out to $2 per keg
of beer. How m...