Last Activity:01-06-2015 10:50 AM
Likes Given: 49
41 Likes on 40 Posts
Posted in thread: Kill-A-Watt Brewery Build Compilation on 10-30-2014 at 01:45 AM
This seems overly complex... Isn't brewing about the art?It's about art, science, engineering
and tinkering. Dare I say... ...welcome back?!
Posted in thread: Exploring "no chill" brewing on 10-08-2014 at 05:01 PM
Thanks for the reply. Please correct me if I get the science wrong but I believe the two
concerns are taken care of. I will pressurize with air. I would think that my previous method
of bubbling air f...
Posted in thread: Exploring "no chill" brewing on 10-08-2014 at 12:26 PM
3. Pressurize the hot keg until the spunding valve releases at about 20 psi. (So that the keg
does not develop a vacuum as it cools)4. Leave lid open on the fermentation chamber until
temperature has ...
Posted in thread: 1/2" id cfc? on 11-15-2013 at 04:54 PM
I'm coming from using a 15 plate chiller and I've always bagged my hops with a hop spider. I
don't want to move backwards in chilling efficiency just to not have to bag my hops. I was
looking to upgra...
Posted in thread: 1/2" id cfc? on 11-15-2013 at 02:47 PM
So I picked up a couple of 50' rolls of 5/8" OD X 1/2" ID copper tubing from Home Depot very
cheaply and was thinking of making a CFC. I like the fact that I would have full flow of wort
through the C...
Posted in thread: Wife needs advice...again :) on 11-06-2013 at 06:44 PM
You will want to turn the PSI down, if you want it up at 10-11 PSI you will want to scrap the
beverage lines you have now and go with 10-12ft lines at 3/16" ID. Good rule of thumb is to
keep the PSI d...
Posted in thread: Slim quarter keg system build on 11-04-2013 at 06:16 PM
Here we go with another Scuba Steve Build! ;0)
Posted in thread: Duda Diesel - 30 Plate Chiller on 10-04-2013 at 03:11 PM
Interested, what is shipping to 44201?
Posted in thread: Sanke fermenter issue on 08-21-2013 at 02:16 PM
If you put a gallon of water in there and put it on your burner, heat it up until steam shoots
out like a volcano for 10 minutes or so, then do an oxiclean/PBW soak you won't have any
krausen ring lef...
Posted in thread: R.I.M.S. Mash Home Brew System 4 Sale on 07-29-2013 at 03:39 PM
Interested in one or both of the LG Peristatlic Tube Pumps.