Last Activity:01-24-2015 8:22 PM
Likes Given: 1
1 Likes on 1 Posts
Posted in thread: No more broken auto siphons on 12-24-2011 at 01:46 PM
Here are a few more pictures. Send me a Pm two check valves where silver solder together
reason being Tig welding would be almost permanent and the solder it can be disassembled if
needed. I know it...
Posted in thread: No more broken auto siphons on 12-23-2011 at 01:33 PM
Talked swagman into making a new Transfer device now I won't have anymore cracked plastic
siphon's. Its made all from SS except the Tip and the top guide. !/2 inch inner tube which
makes transfers a l...
Posted in thread: So Long Leaks on 11-16-2011 at 04:08 PM
Looks similar to the ones on my ferminator, really nice not to worry about leaks. But cam locks
also work really well if you can get some with viton or high quality silicone seals.I looked at
Posted in thread: So Long Leaks on 11-16-2011 at 02:57 PM
So long to leaking quick connects went all Tri fittings.Little warm when brewing but with the
aid of some changes I don' have any changes to make and the big thing leaks are gone. Seem I
was always ha...
Posted in thread: 4" triclover fermenter on 11-07-2011 at 02:25 AM
Woodie,Is that top the same one that you cut out of that keg? If so, how did you make it over
lap the edge of the hole you cut?Swagman cut a 10 inch hole in the keg and used a top cut from
Posted in thread: 4" triclover fermenter on 11-06-2011 at 09:43 PM
Here is what Swagman came up with very well plus it has a 2inch dump in the bottom. Top
gasket seal well.Here is the second one with different ideal on top clamps shot of the racking
cane I had mad...
Posted in thread: My experience with local welder on 10-11-2011 at 12:02 PM
Wow! Excellent price!!We charge $30 per port including the fitting.Guess we are lucky here in
the Midwest. Swagman charges 12.00 per 1/2 coupler and furnishes the coupler. He also turn
down's half of ...
Posted in thread: Source for 2" triclamp to 1/2" npt adapter? on 09-20-2011 at 01:25 PM
Pm sent Swagman does custom fittings and this be no problemWoodie
Posted in thread: Why do we cut the keggle like we do. on 09-10-2011 at 12:24 PM
Had Swagman cut my kegs and this is what he came up with. wish the powers to be would let him
on the board but I guess the all mighty dollar is in first and the brewers secondWoodie
Posted in thread: Tig service for Keggle, cost? on 08-12-2011 at 10:28 PM
Turns out I need a weld. one of my ports on the Keggle is too sloppy for me to solder. (not to
self, hole saw was not the right tool. oops) What should I expect to pay for such a service?
(one, 1.25" ...