Last Activity:10-27-2015 1:22 AM
Posted in thread: Keggle thermometer fogging - solutions? on 10-26-2015 at 03:12 AM
Built a keggle about 2 years ago with two welded SS couplings....one for a 3-piece ball valve
and one for a combo Miljoco thermometer and sightglass.Recently moved and during my first brew
since, the ...
Posted in thread: Help me move from Extract to All Grain. Equipment discussion on 06-07-2013 at 04:40 AM
I've been brewing with extract for the past two years and I think I'm ready to move to all
grain. Most of my buddies have moved on so I'm looking for additional suggestions to acquire
the equipment ne...
Posted in thread: Help needed for Keezer - and my 16 month old son... on 11-23-2011 at 04:34 PM
Long story short, I built a budget-build 20 cu ft Keezer using an old Admiral chest freezer
from craigslist. Repainted it white, did a simple 2x6 collar, and threw a couple of cheap
harbor freight fur...
Posted in thread: Is DIY kegerator/keezer more cost effective or just fun? on 11-16-2011 at 06:39 PM
I originally rebuilt my kegerator with a new Perlick faucet, regulator, new hoses and fittings
only reusing the fridge/tower/CO2 tank from the old setup....then I came across a 20 cu ft
freezer for $4...
Posted in thread: Question regarding grain steeping on 11-04-2011 at 02:41 PM
Thanks to both of you.That's what I thought, but yesterday I had a conversation with another
homebrewer buddy who thought too much water would leach too much from the grains and give off
Posted in thread: Question regarding grain steeping on 11-04-2011 at 12:58 PM
A friend of mine introduced me to homebrewing back in June.He brews all grain and hadn't done
an extract brew in a couple of years prior to June.Long story short, I am doing a full boil
using a 15.5 g...
Posted in thread: Beer not carbonating in keg? on 10-07-2011 at 05:31 PM
For the first two brews, CO2 was connected from initial kegging until keg blew. Both were
undercarbed, but I didn't force carbonate (shake) either one and both were initially set to
about 20 psi, not ...
Posted in thread: Beer not carbonating in keg? on 10-07-2011 at 12:20 PM
The Keezer has a Johnson controller set to 36* with 4* of differential keeping the temps
between 34-38. The readout is typically between 37-39* depending how often the door is open.
The temperature se...
Posted in thread: Beer not carbonating in keg? on 10-06-2011 at 12:59 AM
I could definitely hear the gas going into the keg....as I was shaking, I'd periodically
position the keg so I could hear the bubbles of the CO2 going through the beer at the
connection.Well, maybe I'...
Posted in thread: Beer not carbonating in keg? on 10-04-2011 at 12:41 PM
Kegs are in the fridge.Dual Guage Regulator appears to be in good working shape. It's only 4
month old (was brand new before first homebrew). And while this test is very in accurate,