VIEW MY

WickedWortBrewing

Gift Premium Subscription To WickedWortBrewing

Join Date:

12-19-2012

Last Activity:

01-24-2013 8:59 PM

LATEST ACTIVITY

  • Posted in thread: Help with simple switch wiring question on 01-12-2013 at 09:40 PM
    It is model cr102j5rs215qf6 made by c&k components. I got them on digikey, the part number is
    401-1312-nd

  • Posted in thread: Help with simple switch wiring question on 01-12-2013 at 09:08 PM
    I'm in the midst of building my control panel. I have some illuminated LED rocker switches but
    can't figure out how to wire them. There are 4 pins on the bottom. Pin 1, 2, 3-, 3+. I get that
    pin 1 and...

  • Posted in thread: Induction brewing on 01-10-2013 at 05:09 PM
    Also forgot to mention that we too are using propane for boiling. Induction is for the heat
    exchanger and sparge only. That way we can mash and sparge indoors and do the boil outside on
    the deck if it...

  • Posted in thread: Induction brewing on 01-10-2013 at 05:03 PM
    Another thing to remember is that many of the off the shelf units have a cooling fan that needs
    to run once you power off the unit. I'd be hesitant that an automatic temp control system that
    is contin...

  • Posted in thread: Induction brewing on 01-09-2013 at 05:10 AM
    We are using an 1800 watt induction cooktop to maintain our heat exchange and sparge water
    temps in our 10 gallon HERMS system. Only have one brew so far but it worked well for that.
    I'll post back af...

  • Posted in thread: Control Panel Wiring Check on 12-27-2012 at 07:06 PM
    Thanks for the suggestion jCOS. Unfortunately looks like most of those only go up to ~158
    degrees. I need something that goes higher and can be placed into the liquid. This is why I am
    going with the ...

  • Posted in thread: Control Panel Wiring Check on 12-27-2012 at 03:27 PM
    Thanks, will check out your build.Does any have experience with these cheap-o RTD meters from
    ebay? About to pull the trigger on them...

  • Posted in thread: Control Panel Wiring Check on 12-27-2012 at 01:15 PM
    Thanks BNB. Great catch on the heater power light. I'll swap the wires for that. Also
    considering going with illuminated push-button switches to save on space instead of having a
    separate switch and l...

  • Posted in thread: Control Panel Wiring Check on 12-27-2012 at 11:35 AM
    I figured a description of my system would be helpful. We have a two tier hybrid herms system
    with a 15 gallon SS boil kettle, 10 gallon igloo mashtun and 10 gallon SS HLT. I say hybrid
    because the bo...

  • Posted in thread: Control Panel Wiring Check on 12-26-2012 at 03:14 PM
    Hello all. Long time reader, first time poster. First and foremost I want to thank everyone on
    on HomeBrewTalk for your valuable contributions and information. After reading through
    countless posts I ...

0 COMMENTS
POST A COMMENT