Last Activity:08-19-2014 3:09 PM
Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-01-2011 at 02:16 PM
Almost 3000 entries already, pretty impressive. Better chances than the lottery I suppose. I'm
Posted in thread: Stainless Steel Shanks - 3 1/8" x 1/4" bore on 05-26-2011 at 01:18 AM
That's great looking! Damn, you didn't mess around! I'm glad to see they'll be put to good use.
Posted in thread: Stainless Steel Shanks - 3 1/8" x 1/4" bore on 05-17-2011 at 11:35 PM
You should have about 7/16" left exposed for your tail piece. Can you remove some of the wood
off the back side of the 2x8 where the threaded nut secures the shank?So instead of going
through 1.5" of ...
Posted in thread: Stainless Steel Shanks - 3 1/8" x 1/4" bore on 05-17-2011 at 10:24 PM
Posted in thread: Beer line tests & solution to the "plastic" taste on 04-19-2011 at 01:01 PM
I too use 1/4" Bev-Seal Ultra, and I put ~30' line on each tap after reading here how little
resistance these lines offer. I'm glad I did, because at 44F and 8psi, my beer pours very
quick, but accept...
Posted in thread: A dumb idea for a burner wind shield on 02-19-2011 at 12:44 AM
Don't see why that wouldn't work, might be a bit shallow though. One way to find out...Your dog
might piss in your beer though, so watch for that.Let's see, that's a LG TV, Sony DVD, Wii...
Posted in thread: Refractometer and recipe questions on 01-04-2011 at 06:46 PM
From what I understand, the reason for the more advanced calculation post fermentation is due
to the alcohol present in the solution. I only use a refractometer for both pre and post
Posted in thread: Airlock on secondary on 12-20-2010 at 07:03 PM
And I'll throw out there that you probably don't NEED to get an airlock for this particular
instance if it's a hassle. Remember, co2 is heavier than o2, so it will provide a blanket on
the top of your...
Posted in thread: O-Ring Replacement Sizes on 11-03-2010 at 07:40 PM
190025K3681 PackDouble Seal Buna-n O-ring, As568a Dash Number 10929452K231 PackBuna-n O-ring,
As568a Dash Number 11139452K2182 PacksBuna-n O-ring, As568a Dash Number 417These part numbers I
got from a...
Posted in thread: Jester Keezer Build, with a twist on 10-12-2010 at 05:31 PM
Props! Great job, and cool idea on the frosted glass. I guess you have to be pretty careful
with the glass when changing kegs, dropping free weights, etc? Or is it pretty tough stuff?You
should do a "...