Last Activity:02-12-2014 7:10 PM
Posted in thread: 60 gallons a day water filtering?? on 12-22-2011 at 04:12 PM
Quote:I would guess from the size of your brew pub, you would probably need to change out the
carbon, ( around $80) every 7 or 8 yearsunfortunately carbon doesnt last indefinately even if
you arent us...
Posted in thread: 60 gallons a day water filtering?? on 12-21-2011 at 01:29 PM
Are there carbon blocks that big that would not have to be changed out daily?There are really
two different ways to remove chlorine.One way would be to use a carbon filter tank. It would
resemble a wa...
Posted in thread: 60 gallons a day water filtering?? on 12-21-2011 at 01:18 PM
I would like to post my .02 about some of the comments on water.RO water is simply reverse
osmosis water. As with anything else, there are different qualities of RO water. The quality of
RO water is m...
Posted in thread: For those with welders.... on 12-09-2011 at 11:51 AM
You need the DC to be able to use the machine as a scratch start tig. If you were able to find
a good deal on an AC/DC model, you would still have to buy a regulator/flow meter, and a tig
torch with a...
Posted in thread: For those with welders.... on 12-04-2011 at 12:37 AM
If it is an ac/dc stick welder, you can add a tig torch, and "scratch" start tig.
Posted in thread: Greenlee punch issue on 09-29-2011 at 01:45 AM
I have found that a good quality (lennox) hole saw works better than the greenlee punch, or a
step bit. I recently cut 8 or so 1/2" holes with a lennox, and it looked like it was never used
Posted in thread: homemade chiller on 09-26-2011 at 09:56 PM
Stainless instrumentation is what i used. The tubing is pretty cheap, it is the compression
fittings that are expensive. My friend at work, made one just like mine, and did a "test run"
this past week...
Posted in thread: homemade chiller on 09-25-2011 at 02:09 PM
I used 1/2" stainless steel. I got it for free from work. We made a "drum" with a hole in it
that could be attached to a threading machine. The threading machine would turn at a constant
slow speed, a...
Posted in thread: Sabco Universal Siphon Issue. Won't fit, too long? on 09-22-2011 at 02:01 AM
Can you just bend the tube a little bit more, so it will hit the hole?can you put the tube
through the hole first, and then thread it in the coupling?
Posted in thread: Good Online Store for Double Pole GFCI Breakers? on 01-22-2010 at 11:35 AM
Home Depot carries double pole GFCI breakers for the homeline/square D boxes. The spa panel
that you are looking at, is actually a 100 or 125 amp( I don't recall which) subpanel. It comes
with 1 50 am...