VIEW MY

weathejx

Gift Premium Subscription To weathejx

Join Date:

08-05-2010

Last Activity:

08-27-2014 8:47 PM

1 Likes on 1 Posts 

    ABOUT ME

  • Washington, DC
  • Male
  • Single

LATEST ACTIVITY

  • Posted in thread: eBIAB Build with Pump Toolbox on 06-15-2014 at 06:18 AM
    My first thought after the brew was "holy crap, I cut two hours off my brew day and didn't
    really have to monitor the process."I didn't set up the PID correctly, so the first 15-30
    minutes of my mash ...

  • Posted in thread: eBIAB Build with Pump Toolbox on 06-15-2014 at 06:00 AM
    How about a pic of the SSR and fan? All outside the box, or inside the box? I am interested in
    how hot things get inside with the pump motor and SSR throwing heat.Everything is inside the
    box. I haven...

  • Posted in thread: eBIAB Build with Pump Toolbox on 06-14-2014 at 08:20 PM
    Ok, I think this is everything. I kept pretty good track, the first number is how many I
    bought, then the item, then the cost, then the link where I bought it. I already had a heat
    exchanger, so I did...

  • Posted in thread: eBIAB Build with Pump Toolbox on 06-14-2014 at 07:34 PM
    Nice build!Is there any way for water to get into the tool box if the pump leaks?The pump head
    is completely outside of the toolbox, so if it leaked, it would be outside. The toolbox isn't
    waterproof ...

  • Posted in thread: GE FCM5 Keezer Build on 06-13-2014 at 09:48 PM
    I got 3 in there, but subsequently sold it.

  • Posted in thread: eBIAB Build with Pump Toolbox on 06-13-2014 at 09:39 PM
    After 6 months, I've finally got everything bought and built!Full Setup Box cut some corners
    (mainly the twist lock stuff) but ended up with pretty much exactly what I wanted.Many thanks
    to Kal for ...

  • Posted in thread: RTDs reading different temps on 06-13-2014 at 09:13 PM
    I am using the RTDs on the same PID. Ill do as you suggest and calibrate on the 50mm, as it'll
    be taking the mash temp and the 4" is sitting in the boil. I guess I don't really need the 4",
    but since ...

  • Posted in thread: RTDs reading different temps on 06-13-2014 at 04:43 PM
    (sorry for the cross post with DIY, but I wasn't getting any views/responses)I have the ever
    popular SYL-2352 and two RTD probes, a 4" and a 50mm and I've got them wired up to the quick
    disconnects - ...

  • Posted in thread: RTD's reading different temps on 06-13-2014 at 01:36 PM
    I have the ever popular SYL-2352 and two RTD probes, a 4" and a 50mm and I've got them wired up
    to the quick disconnects - all from Auber.I was calibrating the PID and noticed that the probes
    read the...

  • Posted in thread: Spa Panel keeps tripping on 03-05-2014 at 03:36 PM
    Open the back of the dryer, I bet you the factory bonding strap was never removed. Dryers come
    from the factory bonded with neutral and ground bonded for people with three wire set up. I
    will often 4 ...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS