VIEW MY

wasitim

Gift Premium Subscription To wasitim

Join Date:

10-23-2013

Last Activity:

05-18-2015 11:30 AM

5 Likes on 3 Posts 

LATEST ACTIVITY

  • Posted in thread: Has anyone ACTUALLY used a chest freezer as a glycol chiller on 03-20-2015 at 11:33 AM
    So even if I went to a higher BTU AC, it's probably not going make it any better since we're
    trying to push these things outside of the specs they were designed for. That all makes sense.
    My system ca...

  • Posted in thread: Has anyone ACTUALLY used a chest freezer as a glycol chiller on 03-13-2015 at 01:05 PM
    Thanks for the response Shockerengr.It isn't the coil inside the cooler that's freezing up. The
    components outside of the cooler in the AC itself are all covered with ice. I think the parts
    are the co...

  • Posted in thread: Has anyone ACTUALLY used a chest freezer as a glycol chiller on 03-09-2015 at 07:28 PM
    This thread may be dead but I'll give it a shot.I've been using a 5K window aircon for the past
    1.5 years for our 3 little 15 gallon plastic conicals with coils. It works great for regular
    ale temps. ...

  • Posted in thread: Has anyone ACTUALLY used a chest freezer as a glycol chiller on 03-09-2015 at 07:27 PM
    This thread may be dead but I'll give it a shot.I've been using a 5K window aircon for the past
    1.5 years for our 3 little 15 gallon plastic conicals with coils. It works great for regular
    ale temps. ...

  • Posted in thread: DIY glycol chilled plastic conical fermenters on 01-05-2015 at 03:36 PM
    Has anyone who built one of these setups that used the hydraulic disconnects end up having
    corrosion on the steel disconnects? Im wondering if I should go brass or steelI've have 3
    plastic conicals wo...

  • Posted in thread: Re-use of WPL530 on 10-30-2014 at 12:04 PM
    I'm about a week away from kegging up my first Tripel. Pretty much followed Jamil recipe. Added
    some local honey directly to the fermenter as the fermentation slowed.With the honey, my OG was
    1.098. A...

  • Posted in thread: NEW 5 Gallon Ball Lock Kegs Class 2's IN STOCK! on 09-16-2014 at 12:44 PM
    Late in getting back to this. I hooked up with the folks at Keg Connection and sent them some
    pictures of the threads on the keg. After looking at them, they were happy to replace the kegs
    that I was ...

  • Posted in thread: DIY glycol chilled plastic conical fermenters on 07-29-2014 at 12:58 PM
    TD, In System Settings, Miscellaneous System Settings, there are options to force outputs at
    startup. Just make sure that you want these to always come on after power failure. If you're
    not currently ...

  • Posted in thread: NEW 5 Gallon Ball Lock Kegs Class 2's IN STOCK! on 06-25-2014 at 11:57 AM
    So none of you folks have had the issue where the post won't screw back on to the out threads?
    I have a couple kegs now where I can't get the post to go back on even with no spring or tube
    in place. I...

  • Posted in thread: NEW 5 Gallon Ball Lock Kegs Class 2's IN STOCK! on 06-25-2014 at 10:06 AM
    Have you tried the soapy water spray or cutting the spring a bit?

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS