Last Activity:03-10-2014 6:36 AM
Likes Given: 12
9 Likes on 8 Posts
Posted in thread: Keezer build on 02-05-2014 at 03:14 PM
Originally planned on that but the owner is fine with it the way it is. Now he wants me too add
3 taps on the collar. He wants 7 sixtels now, said he's hooked on the variety of beer, none of
us here w...
Posted in thread: Keezer build on 02-04-2014 at 01:19 PM
Grainger Cat pg 4506 Dayton Blower Motor item #1TDP7 $88
Posted in thread: Spike Brewing 12.5 Gallon Conical Fermenter Giveaway! on 01-08-2014 at 12:49 PM
Count me in!
Posted in thread: Keezer build on 01-03-2014 at 02:17 PM
The system was installed in a 15 cu ft. If your taps are coming direct out of the collar a
smaller one probably would work fine. I'm guessing for a remote tap setup like I did you might
want to go big...
Posted in thread: Keezer build on 01-03-2014 at 01:25 PM
First pour of the evening yesterday, perfect pour!
Posted in thread: Keezer build on 01-01-2014 at 05:49 PM
Thought I'd share the pics of Joe's mancave.
Posted in thread: Keezer build on 01-01-2014 at 05:15 PM
Joe's probably going to add the tall Yuengling ale 1/4's. There are two sixtels and two 1/2s in
it now. The one sixtel is at an angle on the step.
Posted in thread: Keezer build on 01-01-2014 at 05:13 PM
Joe is already thinking of doing what you suggested. 150 lb kegs are a two man job for a
Posted in thread: Keezer build on 01-01-2014 at 04:02 PM
Had the thermostat set @ 38 deg. Keezer was 46 and lines were around 48. Turned the therm down
to 24 setting and keezer today is 34 and lines are 36. Setting at 26 on the thermostat and that
Posted in thread: Keezer build on 12-31-2013 at 01:38 PM
The blower isn't from micromatic. It is from grainger and is rated at 146 cfm. I'll be checking
the temps in the keezer and the trunk line tonight to compare them. The air flow seems very