Last Activity:07-08-2013 11:47 PM
Posted in thread: Blichmann Optional Tri-Clamp Blow-off Kit on 03-28-2013 at 10:14 PM
Blichmann Optional Tri-Clamp Blow-off Kit for any fermenator.Has anyone used this
item/installed? I was told by Blichmann help line that it fastens in a 1.25" hole in the lid
which would be a common #...
Posted in thread: Thermowells 101 on 02-18-2013 at 10:24 AM
Hi Adeering, I contacted John @ Stout Tanks & Kettles and proposed this question, "Please shed
some light on what could be used and where it could possibly be acquired. I don't think Thermo
Posted in thread: What Supply Power Will Be Required on 01-10-2013 at 10:56 PM
This is a response from an Electricians Contractor forum.Yes, that would work. But I wouldn't
recommend it. GFCI's are very sensitive, and if the cumulative ground leakage of everything
connected to t...
Posted in thread: What Supply Power Will Be Required on 01-10-2013 at 07:49 PM
ya I looked at one from Menard's for $54.97 and considered it. Not sure how to implement it to
my current setup. So I've considered the QO240GFI to be a better, cleaner adaption move for me.
It's on e...
Posted in thread: What Supply Power Will Be Required on 01-10-2013 at 06:28 PM
Thanks danb35 I glanced over the third option too quickly as I was wrapping my head around 30a
SP breaker for the homeline sub panel. Quick question while I ponder my options. If I changed
my breaker ...
Posted in thread: What Supply Power Will Be Required on 01-10-2013 at 05:10 AM
I'd really like to know the feasibility of running a 20a DP Breaker to provide power to 2 120v
elements 1 for the RIM tube and the other selectable for either the HLT or BK. One leg of the
DP breaker ...
Posted in thread: What Supply Power Will Be Required on 01-09-2013 at 05:40 PM
I have a full blown Woodworking shop in my garage. So the following circuits are readily
available. a basement Square D QO 40a double pole supplies power to my homeline sub panel in
the workshop (sub ...
Posted in thread: What Supply Power Will Be Required on 01-09-2013 at 08:57 AM
Thanks stlbeer. I've been stalking the forum and the electricbrewery forum for about 4 months
now and have amassed over $500 in supplies to do this build so far. The amp ratings you state
are for one ...
Posted in thread: What Supply Power Will Be Required on 01-09-2013 at 04:56 AM
I'd like to build a panel that will provide power to a recirculating RIM tube (1500w) and a
1500w element in my HLT. What Amperage will be required to power this (120v). Only one March
815PL at this t...
Posted in thread: Timer Function or What roll does the Timer Play? on 01-03-2013 at 08:21 PM
OK here's an interesting question. say I opt for the timer (prob ASL-51 or JSL-71) and I'm
using an alarm can I wire the alarm to serve two functions? Like alert me if the mash temp
exceeds a preset l...