Gift Premium Subscription To vnakkar

Join Date:


Last Activity:

01-30-2013 7:17 PM

Likes Given: 1


  • Chicago
  • Single


  • Posted in thread: Stuck sparge vent on 10-29-2012 at 08:23 PM
    that a grainmill is "an investment" and not just a toy.It absolutely is. You could save upwards
    of $.50 / pound on grain...or more. Between buying in larger bags and then crushing it
    yourself. I save ...

  • Posted in thread: ss toilet braid VS bazooka screen on 07-23-2012 at 07:19 PM
    I've used both a braid and bazooka screens. The bazooka was hands down better for me, it even
    comes with the 1/2 npt fitting. By the time you're done mucking about with a braid, fitting,
    inserting a s...

  • Posted in thread: Electrical Help for Stir Plate on 07-23-2012 at 05:29 PM
    Higher volt power supply will get you more power to be sure.However, a 2 - 3 inch vortex is
    plenty awesome. You're cultivating yeast, not making a margarita.

  • Posted in thread: Ready or Not E-BIAB Here I Come.... on 03-29-2012 at 03:28 PM
    I took a reading off the stem, it maxed out at about 250 degrees, and seem to dissipate fast...
    meaning it didn't make the lamp or the wires hot.

  • Posted in thread: Ready or Not E-BIAB Here I Come.... on 03-28-2012 at 06:00 PM
    Thanks for the reply.Mine seems very bright. The lamp part is fine and cool, its the stem that
    was hot. I imagine there is something inside stepping down the voltage to the LED, that's
    probably whats ...

  • Posted in thread: Ready or Not E-BIAB Here I Come.... on 03-28-2012 at 05:39 PM
    Hi,I loved your idea of putting the indicator light in the gang box on the kettle.I ordered the
    same lamp you have. Are you running them 220v? The website said 110/220... but on the lamp it
    says 110. ...

  • Posted in thread: Small regulators for portable kegging on 03-22-2012 at 03:51 PM
    I have one of these... works great.

  • Posted in thread: Bodine motor for grain mill? cheap on 02-29-2012 at 02:23 AM
    I found it on Ebay a few weeks ago for 50 bucks. It controls the speed of the motor by
    controlling the hertz from 0 to 60hz. motors rated at 60 which puts it at 177 rpm.OMG HBT Wins
    AGAIN!I just bough...

  • Posted in thread: Kettle size? on 01-23-2012 at 09:38 PM
    I want to move from 10gal to 15gal batches.How big of a kettle do I need? 20? 25? 30?Morebeer
    has a 26gal size one... but blichmann jumps from 20 to 30... 20 seems too small.Thanks.

  • Posted in thread: Suggestions to improve heating efficiency from propane burner on 01-23-2012 at 09:35 PM
    Try a better wind block. I had great success by making one. Most hardware stores will sell
    small sheet metal for just a few bucks... buy some and bolt it on.