Last Activity:09-01-2015 11:21 PM
Likes Given: 21
30 Likes on 28 Posts
Posted in thread: How To: BrewPi LCD Add-On on 05-11-2015 at 06:09 PM
Wow those pfets are small I'll need to find a way to hold those and solder it in place!Yeah, I
took one look at those solder jobs with those myself and said "bugger that" and went with the
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 05-08-2015 at 10:32 PM
Miki, I actually had the same issue. Have three ports in mine (third not needed, dunno why) and
I included a sensor in the box itself to act as "room". Room worked without issue, as it did
when beer O...
Posted in thread: beer tools 2 on 05-08-2015 at 06:43 PM
THREAD NECROMANCY ALERT! So been on hiatus for some time, and still running 1.5. Be happy to
upgrade to 2.0, but how on earth do you get the upgrade version? (I only see the full version
Posted in thread: Canning Jar Trub/Yeast Harvester for Conical on 05-08-2015 at 02:37 PM
Nothing wrong with that at all! In fact, even though I went an ordered a sight glass, and the
other parts from Derrin to basically make a Morebeer harvester, I also ordered a pack of lids
Posted in thread: Canning Jar Trub/Yeast Harvester for Conical on 05-08-2015 at 04:20 AM
The nice thing about the mason jar approach is that once you harvest, just swap the lid and
done. I suppose using the sight glass option (ala Morebeer's one) you can just pour it into a
cleaned and sa...
Posted in thread: Canning Jar Trub/Yeast Harvester for Conical on 05-07-2015 at 10:09 PM
Of course the other option is to use a sanitary sight glass. Which are normally really bloody
expensive, but can be had on ebay rather cheap:
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 05-05-2015 at 10:07 PM
Custom plexiglass case??? Who made that?I designed it (well, was able to get the EPS files from
the guy who did the official BrewPi case so used his joining system), and then had a company
here in the...
Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 05-05-2015 at 01:09 AM
Bow-chicka-wow-wow...After much wrangling, finagling, shenanigans, and all sorts of other
psychosis, mine is finally up and running. Snagged a dual volt buck converter that outputs 5v
and 12v from eba...
Posted in thread: How To: BrewPi LCD Add-On on 05-02-2015 at 12:13 AM
Should be evident what's going on, but the bottom line is the cathodes are either grounded or
connected to the same AVR IO signals that switch the relay channels...hth!Cheers!It does. Works
like a cha...
Posted in thread: How To: BrewPi LCD Add-On on 05-01-2015 at 01:54 AM
trippr, I'm still confussed and discombobulated by the cool/heat LEDs. If the anodes are tied
to the 5V rail via the resistors, (and the cathodes to ground), then aren't the LEDs going to
be always on...