Last Activity:05-17-2013 5:29 PM
1 Likes on 1 Posts
Posted in thread: Growing hops up the wall to rafters? on 02-13-2013 at 05:00 AM
I tied twine to a 6' piece of 2x2 and set it in my gutter and ran them down to my pots, worked
pretty well. I have also used some 16p nails pounded about 2/3s of the way in.Stainless seems a
Posted in thread: Possible help for coffin builders with heavy lids on 02-04-2013 at 07:49 AM
You could also repurpose a rear door support from a van or station wagon. You can find them in
junkyards for about $5 for the same type of gas shock.
Posted in thread: Alternative berliner weisse technique? on 01-28-2013 at 01:22 AM
You could also use acidulated malt or really cheat and dose in food grade lactic acid. I have
had tasty Berliners using both techniques
Posted in thread: How to Remove a Miller Threaded Keg Valve (not retained by a spiral ring) on 09-01-2011 at 04:39 AM
I work with the ones with one catch, they are easy to work with. 1 bar is 14.7 psi so yeah
Posted in thread: How to Remove a Miller Threaded Keg Valve (not retained by a spiral ring) on 08-30-2011 at 07:55 PM
Screw in spear converted cornies? Thats a new one to me. To remove the spear loosen it with a
hammer and punch until it spins but the threads arent engaged. Then put a 1/4" or 3/8" nut on
to of the ba...
Posted in thread: Did I just ruin a fridge? on 07-07-2011 at 05:51 PM
I measured 140 with the compressor on, not sure if thats what your supposed to do but thats how
I did it. On my spec sticker it just say high and low and the pressure ratings, no
temperatures. It is a...
Posted in thread: Did I just ruin a fridge? on 06-29-2011 at 02:28 AM
Posted in thread: Did I just ruin a fridge? on 06-29-2011 at 01:57 AM
So I have been getting some questions on the fix and if its holding, it is. My only complaint
is the compressor seems a little small for the size of my box which makes sense. I never got
around to add...
Posted in thread: Beer Bike Build Questions on 06-09-2011 at 08:13 PM
Sierra Nevada has one of those bike bars too. We are just looking to make something to serve
out of. We dont have anywhere near the funds to do one of those, would be pretty sweet though
Posted in thread: Beer Bike Build Questions on 06-09-2011 at 01:05 AM
I guess with all that weight in the back there is no risk of going over the handlebars from the