- Posts 20
Last Activity:12-24-2011 3:23 PM
Posted in thread: Carboy/ Keg Cleaner Giveaway on 05-26-2011 at 10:33 PM
Pick me please
Posted in thread: Camping Cooler on 05-25-2011 at 12:36 AM
I recently found that a 3 gallon keg fits quite nicely into a 5 gallon Igloo water cooler. I'm
working on my old MLT now to convert it to a single keg "stealth" kegerator.Hey Cpt,Does the 3
Posted in thread: Anyone have experience with these 5.2L (1.37gal) kegs on 05-11-2011 at 10:24 PM
They will sell to the homebrewer. I was looking @ their smaller freshKeg for portable use, but
have not purchased yet (I may go with cornies). Search freshkeg here and you can find a few
Posted in thread: Carboy cap - siphon starter? on 05-10-2011 at 11:03 PM
I think I'll also add 6 - 10 inches of extra tubing to the mouth spout.I have done this, but
lately use the siphon tube filled with starsan and let that pull the beer through to get things
Posted in thread: Primo Stir plate made easy on 05-10-2011 at 08:30 PM
I would like one also if more become available.Thanks for passing them on!
Posted in thread: Bayou Classic 44-QT Stainless Steel Stockpot w/spigot on 05-07-2011 at 01:58 PM
@ sammy33, Nice reef!
Posted in thread: Rubbermaid 10 Gallon Cooler MLT Conversion on 04-26-2011 at 11:23 PM
cool. i got FB from northern brewer and the thing sucks. doesnt even sit flush on the bottom of
my cooler. probably just going to end up with using braided hose. cheaper and seems to be
working for ev...
Posted in thread: Rubbermaid 10 Gallon Cooler MLT Conversion on 04-26-2011 at 07:51 PM
It's 3/8" barb on the FB. I talked with bargainfittings requesting 1/2" Female NPT X 3/8" hose
barb, he said he could probably source it for me but suggested heating the 3/8" and stretch it
over the 1...
Posted in thread: Rubbermaid 10 Gallon Cooler MLT Conversion on 04-26-2011 at 05:21 PM
So I got all the pieces put together. Leak tested it yesterday and its holding good. No leaks.
Here are some pics.Sorry for the blurry picture but this is the pieces that I used that I got
Posted in thread: $269 Conical too good to be true??? on 04-23-2011 at 01:50 AM
This might be their website --> I can't find any contact info on there. No address, no phone
number, etc. A WhoIs lookup said they might be based out of Abington, PA.It's this guy: has
none listed ...