VIEW MY

toadyus

Gift Premium Subscription To toadyus

Join Date:

10-28-2007

Last Activity:

10-23-2008 9:53 AM

    ABOUT ME

  • Alberta, Canada

LATEST ACTIVITY

  • Posted in thread: Kegging to Bottles Question on 06-16-2008 at 02:38 AM
    I have force carbed a beer and it's ready to be bottled but I don't have a counter pressure
    bottler filler. Can you just take the keg off the co2 release the pressure take the top off the
    keg and rack...

  • Posted in thread: Ranco VS Johnson Controls on 05-12-2008 at 05:29 PM
    I bought the Ranco...haven't had any issues with it..

  • Posted in thread: Canadians: local temperature controller source? on 05-12-2008 at 03:26 PM
    I bought my Ranco off ebay...was $80 dollars buddy shipped it USPS didn't have to pay a dime
    for brokerage fees. But took almost 2 weeks to get in my hands. Had to use a cheap timer from
    canadian tire...

  • Posted in thread: Starter that didn't start on 04-16-2008 at 05:31 PM
    I've had wyeast smack packs take 48-72 hours to work with a good starter. Patience is the
    key...

  • Posted in thread: Yeast smack packs on 04-16-2008 at 05:26 PM
    Yup just take some of your wort and put in a sterlized jar and add your smackpack to it. I
    usually wait 1-2 hours before pitching to make sure the starter is good to go

  • Posted in thread: WORST Non-homebrew you've had! on 03-03-2008 at 08:46 PM
    Worst Beer = Molson Canadian...and I'm Canadian...I can't beleive I'm reading that people don't
    like Heineken...probably the best beer I've ever had on tap in Amsterdam...but in the bottle
    I'll agree ...

  • Posted in thread: Chest freezer collar attatchment? on 03-03-2008 at 06:06 PM
    I used corner brackets that I found at home depot. then used silicone to seal it up nice and
    tight to restrict air flow...check out my blog in my signature for pictures.

  • Posted in thread: 4 tap Keezer or Kegerator for $600? on 02-29-2008 at 03:15 PM
    ya I spent about $480 on a 3 tap one..you can check out my signature for the link to my blog
    for the status on the project...waiting on my ranco temperature controller to come can't seem
    to keep a sta...

  • Posted in thread: Corny Keg Question on 02-23-2008 at 05:08 AM
    ok nevermind I just checked the pressure on the regulator dial and it's down to 10 PSI I turned
    off the gas...I checked the pressure relief on the keg and it still has pressure....I've soap
    tested eve...

  • Posted in thread: Corny Keg Question on 02-23-2008 at 04:45 AM
    uh don't slap me but I looked in the box that the regulator came in and I found the wrench and
    this plastic washer...Re-hooked everything backup and now I hear no noise at all...psi has been
    stable at...

FORUM SIGNATURE
Primary: Empty Secondary: Empty Bottle Conditioning: Brew House Stout Kegged: Brew House IPA, Brew House Red Ale Drinking: Coopers Wheat Ale, Brew Canada Red Beer, Brew House Cream Ale, Brew House Pale Ale andEdworts Apfelwein Keezer Project: http://toadyus.wordpress.com/ Next: Dunno...Another BrewHouse?
0 COMMENTS
POST A COMMENT