Last Activity:04-14-2013 9:59 AM
Posted in thread: Two Wire RTD PT100 question on 03-31-2013 at 02:48 PM
I buy my RTD's from Auber Instruments and they are 3-wire...2 reds and 1 white. I use the TA4
and have never had a problem.
Posted in thread: SEMO Club on 03-30-2013 at 07:37 PM
We will have a meeting on the third sunday of the month of april at my house in cape.
Posted in thread: Dispensing Iodophor on 03-25-2013 at 05:43 PM
I use a Mikro-Spray D-3 by Klenzade. I bought it at a dairy supply store in Michigan. You fill
the bowl with about 1/2 gallon of iodophor, turn it to wash and it injects a measured amount of
Posted in thread: Dispensing Iodophor on 03-25-2013 at 05:27 PM
I use a Mikro-Spray D-3 made by Klenzade. I bought it years ago at a dairy supply store in
Michigan. It is made to use as an udder waher. It holds about 1/2 gallon of iodophor. When it
is turned to wa...
Posted in thread: PID controller build on 03-07-2013 at 03:23 PM
It's not rocket science. ajdelange is making it too hard. I understand that you are just trying
to get some information like where to buy a PID. I've built five different RIMS (Recirculating
Posted in thread: Beverage-Air BM-23 Keg Refrigerator ?? on 02-08-2013 at 08:10 PM
I don't know what all the noise is about the BM-23 being loud. I've had one for 25 years and it
is no louder than my refrigerator. These are very nice units. I got mine from a closing
restaurant and i...
Posted in thread: RIMS and Pump in a Toolbox on 01-22-2013 at 04:50 PM
Just somewhat finished my RIMS and Pump in a cheapo Lowe's toolbox. I used the following
schematic from one of the other threads I have found: tested out the pump last night which
worked like a dream...
Posted in thread: Do you know how to make a yeast starter? Then why not farm yeast and freeze it? on 10-29-2012 at 02:46 PM
If anybody needs a stir plate, I make them out of attractive cigar boxes, not cheap project
boxes. I have some for 2 liter Erlenmeyer flasks that will make starter for a 10 gal batch
using a 1 inch st...
Posted in thread: Auber pid 2352 set up & operation help on 08-03-2011 at 06:42 PM
Try an RTD (resistive thermal device) probe instead of the thermocouple. I had serious problems
using a thermocouple. Ruined 3 mashes. They are not linear throughout the brewing range. RTD's
are more ...