Last Activity:02-14-2015 11:31 AM
Posted in thread: Mold on silicon hose on 10-24-2014 at 12:32 AM
Good day,Its been a while since I brewed and just broke out the gear so I could start back up
again. I found some white mold spores on some silicone tubing that I use on my pump. I'm
curious as to the...
Posted in thread: Difficulty hitting the right mash temp. on 05-04-2013 at 10:34 PM
Thanks for the feedback everyone!Brewday is over, and i have been doing some calculations based
on other batches too and it looks like I loose about 10 degrees at strike temp, so I'll just go
Posted in thread: Difficulty hitting the right mash temp. on 05-04-2013 at 06:24 PM
Good day,I have had a recent problem with hitting my mash temp correctly, it's always too high.
Here is my process.-I use a converted cooler as a mash tun.-I heat up my mash water to a boil
and pour m...
Posted in thread: Shark Pants / Live a Rich Life on 08-28-2012 at 07:52 PM
Anyone have a Shark Pants / Live a Rich Life clone recipe?
Posted in thread: Dip tube on Blichmann Boilermaker not working correctly? on 04-29-2012 at 02:21 PM
Did you have a hose on the discharge side of the valve? You need to have the exit hose lower
than the bottom of you pot in order to maintain a siphon action.That would explain it then, I
didn't have a...
Posted in thread: Dip tube on Blichmann Boilermaker not working correctly? on 04-29-2012 at 02:02 PM
Hi all,I recently purchased a Blichmann Boilermaker to replace my old kettle. I installed the
brewmometer, filled it with water to check for leaks, and drained it. Once the water level fell
below the ...
Posted in thread: Boilermaker False BHiottom question. on 03-25-2012 at 04:14 PM
Hi!I've been brewing all-grain for about two years now, and have just ordered my first
Boilermaker Kettle for boiling. I still plan on using a converted cooler for my mash tun, thus
I didn't order the...
Posted in thread: Is this White Stuff normal? on 02-20-2012 at 06:33 PM
Took this photo before I left for work this morning. This is about 12 hours after pitching
yeast (wlp029) and I noticed this white stuff in the kreusen, never seen it before though.
Think I have an in...
Posted in thread: Gravity-fed Plate Chiller question. on 02-20-2012 at 02:30 AM
Hi all,I am using a new plate chiller (which I have no experience with) for the first time
today and ran into a problem. I think I know the answer to my problem, though, I figured I'd
ask anyway. I do...
Posted in thread: Hop Spider!! on 01-18-2012 at 01:24 PM
Question,When using brewing software like BeerAlchemy, BeerSmith, etc., how would you enter the
format of hops when using the Hop Spider? Bagged or Loose?My instinct is to enter them as
bagged hops, b...