Last Activity:01-15-2015 12:22 AM
Likes Given: 1
Posted in thread: Scorching Issues on 01-15-2015 at 06:11 AM
What I am thinking is I don't need a solenoid control of any kind on the burner. I might go
ahead and put a probe in the BK for the heck of it. I could either imbed the burner in the
stand or create a...
Posted in thread: Cost of 240v 30a outlet on 01-15-2015 at 06:00 AM
Delete is beyond my skill level.
Posted in thread: Scorching Issues on 01-15-2015 at 05:50 AM
I am starting a new build in the 20-30 gallon range, HERMs controlled from a BCS460 (though I
am thinking about the Electric Brewery panel). My concern is reading these posts about
Posted in thread: Cost of 240v 30a outlet on 01-15-2015 at 05:36 AM
I just finished wiring a 50 amp and 30 amp 220v outlet 6 feet from my breaker box. Below is the
rough costs. Keep in mind I ran everything inside metal conduit.30 amp only costsOutlet Box
Posted in thread: Proper Element Height in Boil Kettle on 10-30-2013 at 07:30 PM
I am looking to purchase a 20g boil kettle from Brewer's Hardware. Dimensions are 15 3/4
diameter by 25 1/14 tall.I want to put a second 1.5 inch TC fitting on that kettle (and have
them do it prior t...
Posted in thread: Building an all electric system in Beijing on 05-27-2013 at 08:03 AM
I know, its all made here anyway. If I were fluent in Chinese (reading and writing) things
would probably be different. Even so, its almost always more expensive to buy things that are
Posted in thread: Building an all electric system in Beijing on 05-25-2013 at 02:48 PM
The kettle is setup for dual elements, I was going with two of the 4500 watt Camco ULD's, The
total kettle size is 113 liters. The mashtun is the same size, and I had planned on using a
single 4500 wa...
Posted in thread: Building an all electric system in Beijing on 05-19-2013 at 06:33 PM
I am running 10/3 outdoor cable to the elements. Crap, you would think I could figure amperage.
I will have to bump that switch up, but more critical is the breaker in my apartment box.
Posted in thread: Building an all electric system in Beijing on 05-19-2013 at 07:46 AM
So I have been dragging pieces over to China for about 2 years and I am in the final stages of
getting my 29 gallon system up and running. The control circuit is really giving me a hard
time. I though...
Posted in thread: Max element wattage for my RIMS tube on 01-08-2013 at 07:41 AM
I am trying to figure out what is the max size element I can run in the RIMS tube setup from
Brewers Hardware. I have the tube + probe for the BCS controller. want to pick up 3 elements
and take them...