Last Activity:05-23-2015 10:54 PM
2 Likes on 2 Posts
Posted in thread: New way to control Pellet Hop gunk! on 09-07-2014 at 07:30 PM
I've been eyeing one of these hop screens for a while. Has anyone compared the difference in
hop flavor/aroma between the screen and a paint strainer bag?
Posted in thread: How to get the best hop aroma from flameout additions? on 12-07-2013 at 08:50 PM
This is a great thread. Just wondering if anyone has been using this method without dryhopping
and what the results are compared to late boil additions (15, 10, 5, 0 minute). I mostly brew
APAs but I ...
Posted in thread: East Coast Ale Yeast Recipe? on 10-17-2013 at 11:49 PM
I have a vial of White Labs East Coast Ale, but I've heard mixed reviews. Can anyone recommend
a good pale ale or IPA recipe that works well with this strain?
Posted in thread: Dry Yeast Pitch Rate - Am I Wrong??? on 10-06-2013 at 01:14 PM
I started looking into pitching rates and see on Fermentis' website that their dry yeasts have
6x10^9 cells / gram = 6 billion /g = 69 billion / 11.5 g pack = 3.6 million / ml in a 5 gallon
Posted in thread: Keezer Co2 Regulation? on 08-13-2013 at 05:43 PM
I actually never heard of anyone with a high side and a low side regulator.
Posted in thread: Keezer Co2 Regulation? on 08-13-2013 at 03:09 AM
You can go right from the CO2 tank to any number of regulators you need for different serving
pressures. You don't need a high side regulator and a low side regulator. Your regulator will
be able to h...
Posted in thread: Keezer sighting dead ahead on 08-03-2013 at 11:48 AM
I did some running around yesterday to get stuff for my build. How did you rewire the lid
light? I'm going to rewire from the connector at the base to the lid...unless you had a better
Posted in thread: Keezer double lid seal? on 07-30-2013 at 10:49 AM
I'm planning on converting my new Kenmore 8.8 to a keeper and I'm thinking about putting a
second set of hinges to lift the lid only or the lid and collar. I'm thinking of moving the
factory gasket to...
Posted in thread: how easy is it to move a keezer on wheels? on 07-28-2013 at 06:28 PM
I'm planning my keezer build with a Kenmore 8.8 cf chest freezer. How easy is it to move that
keezer if its set on casters and loaded with 6 kegs?
Posted in thread: Keezer sighting dead ahead on 07-27-2013 at 03:27 AM
That keezer looks great. I just got the same freezer and am going to start my build soon. Is it
easy to move the keezer on the casters when its full of kegs?