Gift Premium Subscription To ThePig

Join Date:


Last Activity:

12-04-2011 7:49 PM


  • Seattle
  • Male
  • Married


  • Posted in thread: Pimp my system ! on 05-21-2010 at 02:28 AM
    Kick-Ass job Pat, I'm speechless!

  • Posted in thread: Yet another single tier build thread (and some questions) on 04-10-2010 at 05:57 AM
    I use a Therminator as well - it works great. Bummer on the powder coater. See if you can find
    another and get a good quote before you paint it, you might be surprised at the cost. I got a
    quote for $...

  • Posted in thread: Yet another single tier build thread (and some questions) on 04-09-2010 at 06:47 PM
    I was looking to simplify my all grain brewing setup by building a simple 3 tier stand, but the
    project quickly took a [QUOTE=sudsandswine;1935515]different turn (as most of my projects do)
    and I foun...

  • Posted in thread: Welding S/S to copper on 04-08-2010 at 05:04 PM
    Go with brass fittings when you are working with copper..I don't think copper can be welded to
    stainless. You will need to use dialeteric unions when joing copper and stainless.You don't
    need dilectri...

  • Posted in thread: Basement Brew Room Renovation on 04-08-2010 at 04:46 PM
    Stainless, all stainless!!! :ban:Only about $5.50 sq ft for 20 gauge 304: see...If room is 8'
    x 8 ' square and 7' high, that's about 450 sq ft of wall.450 x $5.50 = $2,475A bargain!
    :D(you've got to ...

  • Posted in thread: The Man Cave is pretty much complete! w/pics on 04-08-2010 at 04:42 PM
    Nicely done!

  • Posted in thread: Pneumatic Bottle Capper - Just...because. on 03-19-2010 at 05:14 AM
    Badass. Simply badass.

  • Posted in thread: Please review my plumbing schematic! on 03-19-2010 at 05:08 AM
    You're good. You have all the processes covered - HLT to Mash, Mash re-circ through HE, Mash to
    Kettle and HLT to Kettle. This is similar to mine in different order. :mug:

  • Posted in thread: Mk-i on 02-21-2010 at 06:34 AM

  • Posted in thread: Cut / Weld Two Kegs for Increase Capacity? on 02-21-2010 at 06:21 AM
    It's a bit of a pain in the ass. I've welded Cornelius kegs together, and I didn't enjoy the
    process one bit. Squaring the cut is terribly tedious, as GreenMonti says. I also found that
    butt welding t...