Gift Premium Subscription To thebeers54

Join Date:


Last Activity:

09-11-2016 2:23 PM


  • Single
  • Leominster
  • MA


  • Posted in thread: Step by Step build a 110v portable PID controller on 03-28-2013 at 02:55 AM
    Would this setup work with a 2000w 120v element? If not, what changes would need to be made.
    I'm converting a kettle to a eHLT, still going to boil with my Blichmann burner and mash in a
    cooler (for n...

  • Posted in thread: Huge E-HERMS build, 3 keggles, control panel, stir plate, ferm controller, 61 pics on 03-26-2013 at 01:30 AM
    That's a great looking system.. Kegs look amazing!

  • Posted in thread: Home Depot 10 Gallon Cooler on 03-21-2013 at 07:31 PM
    It will most likely be fine. I have the same cooler and it developed a bubble that runs
    vertically nearly the entire length on the inside and is raised about 1/2-3/4". I've brewed
    probably 60+ batches...

  • Posted in thread: Williams Brewing brew kettles on 03-21-2013 at 12:36 AM
    If it's the brewers edge 40 QT then I have the same one. I haven't measured the volume full,
    but I have boiled starting with 8.5 gallons and there was still a bit of room left..I just
    eyeballed it wit...

  • Posted in thread: Perlick 525ss... Again on 03-21-2013 at 12:24 AM
    I recently bought 4 from Adventures in Homebrewing and am very happy. It was the best price I
    could find at the time (about 2 months ago).I bought 4 from them also, plus a stout faucet..
    they are fric...

  • Posted in thread: Stainless table work as a brew station? on 03-21-2013 at 12:14 AM
    I have been looking at tables like these to put an electric HLT and cooler MLT on. The one in
    the link above is pretty nice, $125 shipped is a good deal. :mug:

  • Posted in thread: New Pot Size on 03-12-2013 at 02:57 AM
    Looks good, thanks for posting that!

  • Posted in thread: New Pot Size on 03-12-2013 at 02:16 AM
    True. I have the 9 gallon pot referenced in this thread. I basically have to use fermcap to
    prevent boilovers for 5 gallon batches. I just bought the 15 gallon 2 weld pot from to go to...

  • Posted in thread: New Pot Size on 03-12-2013 at 02:13 AM
    I would go bigger as well. I shoot for 5.5 gal into the fermenter and I have a 10 gallon pot.
    If I brew a beer with a 90 min boil I'll start with about 8.5 so It's pretty close. So yeah for
    a couple e...

  • Posted in thread: Bayou Classic Brew Kettle? on 03-12-2013 at 01:52 AM
    I have been considering one of these as a boil kettle.. Without all the extra stuff I have seen
    them at $170ish. A couple days ago I found the pot with valve only (and lid of course) for the
    same pric...