the-crowing

Gift Premium Subscription To the-crowing

Join Date:

05-08-2013

Last Activity:

07-10-2014 3:28 PM

Likes Given: 1

3 Likes on 2 Posts 

LATEST ACTIVITY

  • Posted in thread: National Homebrewer's Conference - HomeBrewTalk Giveaway - Open to All! on 06-15-2014 at 11:13 PM
    I had the pleasure of working all weekend :(I'll also be dry hopping my GumballHead clone
    tonight

  • Posted in thread: Re-using yeast from starter on 06-10-2014 at 01:35 AM
    Thanks all. I'm going to make a 2L starter and pitch all three jars.

  • Posted in thread: Re-using yeast from starter on 06-09-2014 at 10:57 PM
    I know this has been asked before but I couldn't really find a good answer. I made a 3L starter
    and saved about 1L in three 12oz mason jars on Wednesday, June 4th. They all look like the one
    pictured....

  • Posted in thread: 2 ball lock kegs with 6 disconnects AND 3 "cubes" for no chill method on 04-30-2014 at 02:47 AM
    PM sent

  • Posted in thread: Kegging or bottling on 04-01-2014 at 06:28 PM
    Anyone have issues with carbing in the keg cold, bottling, and aging at cellar temps? Any
    issues with carbonation after a longer aging period?

  • Posted in thread: Show us your Kegerator on 03-22-2014 at 02:59 AM
    Must know more...new firmware???If that is Celcius, your beer is going to be a little warm.
    :drunk:

  • Posted in thread: Need to slow down stir plate - wee bit too fast on 03-21-2014 at 01:31 PM
    Adding a 100 ohm resistor in series with the rheostat and fan should drop the fan voltage to
    around 3.5V which should slow the fan down significantly. Are you positive everything is wired
    in series? W...

  • Posted in thread: Need to slow down stir plate - wee bit too fast on 03-21-2014 at 11:09 AM
    Are you asking what size resistor to purchase? If your stir bar is getting tossed I would guess
    the magnets are not positioned properly. Have you messed with the position of the magnets on
    the fan? Al...

  • Posted in thread: Show us your Kegerator on 03-21-2014 at 04:43 AM
    Here's a few pictures of my recent build.185763185764185765185766Is that an STC-1000 measuring
    temp in Farenheit? Did you upgrade to the new firmware released recently?

  • Posted in thread: New or used keg? on 03-03-2014 at 11:14 PM
    Ball locks for $23 each? Lucky....

0 COMMENTS
POST A COMMENT