Last Activity:01-24-2014 2:01 PM
2 Likes on 2 Posts
Posted in thread: Very Cool Brewery from the ground up... on 10-28-2013 at 12:09 PM
Posted in thread: Very Cool Brewery from the ground up... on 10-26-2013 at 05:36 PM
If you are interesting in seeing a brewery being built from the ground up, the Goliad Brewing
Company facebook page is showing how they are doing it with photos of the construction.
Posted in thread: Measuring Beer in Kegs on 03-29-2012 at 06:13 PM
Discussed in this thread -
Posted in thread: Looking for Food Safe materials for Mash Ton. on 03-28-2012 at 06:38 PM
If you are looking for food safe matierials, then simply go with SS for everything in your tun.
Then make sure all your penitrations to your tun are sanitary welded to help ensure there are
no cracks ...
Posted in thread: Why passivation matters on 03-23-2012 at 06:45 PM
Oh and to respond to the remark about fancy fittings: it's not just about the fittings. It's
about changing the structure of the stainless to bring the nickel forward and prevent rusting.
Posted in thread: 50 foot 1/2 inch SS coil on 03-05-2012 at 03:48 PM
Good job V twin, You got the three points of contact idea. Your rig is similar in concept to
mine but my set up has machined dies specced @ 1/2" and a drive mechanic.
Posted in thread: 50 foot 1/2 inch SS coil on 02-29-2012 at 08:09 PM
Tell Dover97 I'll buy the remaining 25 ft. I have the same electric keggle hltNot sure how much
he is going to use, we just thought 25' would have fit better.Forcabrew, what is the distance
Posted in thread: 50 foot 1/2 inch SS coil on 02-29-2012 at 03:37 PM
FYI,Dover97 lives close to the house and he came over to have his coil made. After we finished
his coil we put it in his Keggle that he had brought with him. He had an electric set up with
Posted in thread: 50 foot 1/2 inch SS coil on 02-29-2012 at 03:23 PM
I have alot of guys asking for me to bend thier SS coils, and I have a hand written list of
them. This is becoming a larger project that I first anticipated and I am in the process of
setting up a way...
Posted in thread: PID Controller with Gas Valve on 02-23-2012 at 07:48 PM
To "properly" take advantage of a PID loop to the application you are talking about you will
need a modulating valve to give you a varying orfice for the gas to flow through. The valves
are not cheap....