Last Activity:03-06-2013 10:15 AM
Posted in thread: Just got BeerSmith Lite on my Android! on 10-21-2012 at 06:37 PM
I have tried it on 2 brew days and find each one of the days the app will reload if you have
left it unattended for a period of time or gone into other apps. I haven't been able to figure
out if the t...
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 04-30-2012 at 01:16 AM
Let's not fight in public it is not professionalI spit in your beer
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 04-29-2012 at 06:03 PM
You have chick hands or was that your wife's hands? ;)
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 03-27-2012 at 11:17 PM
The TTB is only interested in enforcing these particular CFR's and could careless if you
fermented in plastic buckets or didn't use SS in certain applications. The local control boards
may be a differ...
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 03-21-2012 at 12:42 AM
I think you'd find more btu's by going low pressure and a jet burner. As for the valves you can
use a Honeywell SV9501 with the integrated intermittent pilot and bypass the high/low piping
Posted in thread: Starter - MrMalty vs Beersmith on 03-20-2012 at 09:28 PM
Did Mr. Malty ever respond to that? It would be great equipment wise if you actually only
needed to make starters a 1/3 of the size.Wish someone could just do their own lab experiment
on a stirring pl...
Posted in thread: Starter - MrMalty vs Beersmith on 03-20-2012 at 07:11 PM
Jamil/White say in their book that 1m cells/ml/plato is the rule of thumb for yeast repitched
not yeast pitched off packs and propogated. They feel a better rule is .75 mil/ml/plato but
again that is ...
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 02-26-2012 at 09:52 PM
You will need to raise the flat bottom kettles to vent the burners, many others have made the
same discovery after trying to get the burners to work correctly. The 4 openings at the corners
are just n...
Posted in thread: 1 BBL Brewery Build ( Brutus Inspired) on 02-26-2012 at 08:04 PM
The fire has to flow up and around the kettle bottom, if it is trapped it will choke the
burners and cause a lot of problems. Half of the air for combustion goes inside the burner, the
other half flow...