- Posts 28
Last Activity:09-27-2013 1:18 PM
Likes Given: 2
1 Likes on 1 Posts
Posted in thread: What section of WalMart has extracts? on 10-06-2013 at 07:12 PM
Pretty much all grocery stores down here - even little ones and mom/pops carry SOME assortment
of extracts in the baking aisle.
Posted in thread: CO2 Supplier Needed, SW MN, SE SD.. Anyone Know?? on 09-24-2013 at 04:54 PM
Interesting.. Maybe they just didn't want me going to the competition.. :D
Posted in thread: Issues Serving Kegged Soda on 09-20-2013 at 06:24 AM
I'm sure someone has a chart or formula, but I'm just going off what I've read about beer. You
use a higher pressure to force carbonate, and then you back it off to serve, otherwise it flows
too fast ...
Posted in thread: CO2 Supplier Needed, SW MN, SE SD.. Anyone Know?? on 09-20-2013 at 04:23 AM
Only problem with Matheson is that they brand their tanks and nobody else will touch them once
you swap. I have two Airgas places in town that charge $27, and Matheson about 30 miles away
(but I still...
Posted in thread: Issues Serving Kegged Soda on 09-20-2013 at 04:17 AM
I think you're simply too high on the CO2 pressure. Back it off to 12-15psi and see what
happens. If you're keeping the keg and hose cold, it shouldn't need 25psi to keep ideal
Posted in thread: Can a CO2 tank be emptied in minutes? on 09-18-2013 at 08:42 PM
Next tank you get, look on the top shoulder for a stamped-in marking TW.. The number after that
is the actual empty (tare) weight of the tank and valve in pounds have a 20lb tank, and the
Posted in thread: carbonating without sweetening? on 09-16-2013 at 01:24 AM
I would say force carbonation is your best bet here..
Posted in thread: Controlling exhaust fan via brewery control panel on 09-12-2013 at 11:36 PM
One could always run the 120v leg to the control panel, and convert it to 5v DC in the control
panel.No, that's backwards. So emjay, when you say 'fan dimmer', you mean something like one of
Posted in thread: Controlling exhaust fan via brewery control panel on 09-10-2013 at 03:45 PM
Ok.. When I said 'the output of the BCS' gets connected to one leg of a switch, I did mean a
line voltage output. So now that I know you're tapping off a 5VDC trigger, it would need to be
the output o...
Posted in thread: Controlling exhaust fan via brewery control panel on 09-09-2013 at 03:04 PM
It's won't have the 'off' position, but the easiest/cheapest (and technically code-compliant)
way is to use a standard three-way switch (the kind you put at the top and bottom of a
stairwell). The lin...