Last Activity:06-28-2014 2:54 PM
2 Likes on 2 Posts
Posted in thread: Best PLC/controller for keg washer on 06-26-2014 at 08:38 PM
If there is anyone that can answer a few questions about ladder logic for Click PLC, I would
greatly appreciate some help. I've got everything wired up in the control panel and, I believe,
most of the...
Posted in thread: Best PLC/controller for keg washer on 05-16-2014 at 12:51 AM
I am in the process of building a professional keg washer and would really like to automate it.
It will consist of 10 solenoid valves and 2 pumps. The heating element will be controlled
separately by ...
Posted in thread: Having trouble wiring motorized ball valve 5 wire on 01-21-2014 at 05:22 PM
Hey yall, I am trying to install a motorized ball valve on my hlt to keep it full with a float
level switch. The motorized ball valve I purchased, has 5 wires and is rated for 110v ac. I
am trying t...
Posted in thread: Help with stalled Saison on 05-25-2013 at 01:18 PM
Why does your mash schedule decrease in temp? It should start low and finish high. 140 to 158
over 2 hours will get you a great amount of fermentables. Or just 146 for 60 even will do it.
Once you go ...
Posted in thread: Malting Gluten Free Grains on 03-06-2013 at 05:49 PM
celiacsurvivor, did you respond and then change your response? I got an email saying you think
the sorgum is ok but the buckwheat is not? Now you think they both will work? I was under the
Posted in thread: Malting Gluten Free Grains on 03-05-2013 at 03:43 AM
Will this work? and I am trying to do this all grain and this is for a small batch at a
brewpub. Thanks for any input.
Posted in thread: AHH...March Pump failing. Fan not spinning. on 01-20-2013 at 11:17 PM
Still works today after that one time disassembly. Must run some pbw or oxyclean or some
caustic through it. Normally do chiller and heating element in bk at the same time. Works
Posted in thread: 1 pump with a 3 way switch for manual and auto? on 11-03-2012 at 02:49 PM
Yes that is the switch I am using Thank you PJ.
Posted in thread: 1 pump with a 3 way switch for manual and auto? on 11-02-2012 at 03:34 PM
The switch is from auber ins. I can provide a pic later.
Posted in thread: 1 pump with a 3 way switch for manual and auto? on 11-01-2012 at 05:22 PM
I am using a basic 3 way switch. Where would I get 1 of those switches?