Last Activity:05-22-2015 8:55 PM
Likes Given: 3
10 Likes on 5 Posts
Posted in thread: Topping off sour secondary on 11-11-2014 at 12:40 AM
I'm in the process of aging my first sour. After moving to the secondary 5 gallon glass carboy.
I have about 4.25 gallons, so the top of the fill line hasn't reached where it becomes narrow.
Should I ...
Posted in thread: Any devices to warn of co2 leaks on 10-05-2014 at 07:25 PM
I've been kegging for some a long time now. However, I've run into some problems with co2 leaks
over the past year. Is there any devices that can give a warning when leak is present? Perhaps
I should ...
Posted in thread: SSR Not Working Please Help on 09-23-2014 at 12:37 AM
Brycewhat was the outcome. I'm seeing some simular behaviors....dtfeld. Are you saying if this
powers up with the SSR 5v not hooked up correctly, it will fail "on" and no matter what you do.
Even if y...
Posted in thread: 5v Arduino input with standard 110v Rated button on 06-17-2014 at 01:56 PM
Great! I was just double checking. I wanted to make sure all my hardware was there before
soldering.Yes this button will work fine with 5V. But you have to do software de-bouncing.Yes,
I found I neede...
Posted in thread: Control box, Using 250V outlet/plugs as 110V on 06-16-2014 at 03:22 PM
I'm in the process of making a control box for a RIMs system. I recently got some plugs &
receptacles that I'm planning on using as a 110V plug. only got these because I wanted locking
Posted in thread: 5v Arduino input with standard 110v Rated button on 06-16-2014 at 03:16 PM
I'm working on an Arduino device and want to hook up one of the digital inputs to a button like
this: would be hooked up to a 5v circuit, not a 110v circuit. However, I'm wondering if this
Posted in thread: DS18B20 used on a RIMS with Arduino PID Library on 04-25-2014 at 04:36 PM
Thanks for the reassurance. You answered my main concern, which is what sort of resolution the
Arduino's PID software needs for a RIMS.
Posted in thread: DS18B20 used on a RIMS with Arduino PID Library on 04-25-2014 at 11:14 AM
I'm thinking about using a DS18B20 for a RIMS system that is driven by an Arduino. How frequent
should the Arduino's PID sample the DS18B20? As fast as it can? or if there was some downside
with back ...
Posted in thread: Extending DS18B20 wire on 04-14-2014 at 02:20 AM
Perhaps an easy question, but couldn't find much on my initial searches. The DS18B20 that I
received in the mail has a small wire attached to it (1 meter). I'm assuming I can extend this
with some ini...
Posted in thread: RIMS users. Is there anything you wished you did differently? on 03-30-2014 at 07:54 PM
Without seeing your plan it is really difficult to provide information or advice.So sorry.P-JI
left it open ended on purpose. I didn't want my plans to limit or guide what people had to say