Last Activity:01-28-2013 5:27 PM
Posted in thread: Keezer conversion questions on 01-28-2013 at 12:09 AM
I'd be careful with what you put around the freezer as it has to be able to reject heat in
order to work properly. As far as being neat and having only one wire that is very possible.
For example, wit...
Posted in thread: Need Electric Motor Wiring Help on 01-21-2013 at 09:38 PM
Do you think the taped up box is the capacitor? It looks like a transformer to me that is
powering the light, but I'm not sure. It's hard to tell with it all taped up...The best move
may be a new cont...
Posted in thread: Need Electric Motor Wiring Help on 01-21-2013 at 09:34 PM
Without seeing a diagram it's hard, but I'll take another stab at it. The issue is that there
are two inputs (P1, P2) to the motor, but three wires (white, red, black) coming out of the
control box (n...
Posted in thread: Need Electric Motor Wiring Help on 01-21-2013 at 09:04 PM
Ok. I'm with you. The red must be used to swap polarity to the motor (via the rotation selector
switch, I didn't look close enough the first time through). As long as you have a potential
going to the...
Posted in thread: Need Electric Motor Wiring Help on 01-21-2013 at 08:34 PM
Just to be clear - you have white, black, red and green out of the motor controller and the
motor controller will power on? Your hang up is how to connect those four wires that are coming
out of the c...
Posted in thread: Groupon Half Off Brewing Kit on 05-09-2011 at 12:12 PM
Just an FYI for anyone who is looking to get a brewing kit, Groupon has a half off a brewing
kit from Midwest. The kit is on special for $63 (usually $127). I'm not sure if every city has
it, but I kn...
Posted in thread: Cherry Coke by Mixing Extracts on 09-11-2010 at 01:47 PM
Good Morning,I picked up some cola extract yesterday from my LHBS and already have some cherry
cola extract. My fiance and I would like to create a cherry coke (ish) cola. Has anyone ever
Posted in thread: Mashing (but not lautering) in a cooler? on 08-31-2010 at 04:48 AM
I have begun to get into all grain batches for my brewing. Since I am only just beginning and
live in an apartment I've been using a mixture of Deathbrewer's Stove-Top method and Charlie
Posted in thread: Polyethylene Line Resistance on 08-01-2010 at 01:48 PM
I've looked and can't find the info I'm looking for. I'm trying to balance my kegerator (in the
design stage). I'd like to use polyethylene tubing (like the stuff at Lowes) going from the keg
Posted in thread: GE 7 cu ft Freezer Power Draw on 07-19-2010 at 07:52 PM
I know there's a sticker on it, but I'm still in the planning stages so I don't have the
freezer yet and I don't want to make a trip to the store just to see the power draw.I'm going
to assume that th...