Last Activity:07-08-2014 2:28 PM
Likes Given: 8
14 Likes on 12 Posts
Posted in thread: Winter Brewing on 11-30-2013 at 11:27 AM
I plan to brew outside through the Adirondack Mountain winter. In fact it was below zero when I
started yesterday but was up in the teens when I started the boil. We'll see how cold I'll go…
Posted in thread: It's cold outside and I want to brew! on 11-29-2013 at 03:03 PM
-22c here so i won't be brewing outdoors today!! That's about -8 F. Couldn't let that stop me
or I'd have to start buying beer. It's almost 10 F now & I'm 15 minutes into boil. Little over
an hour or ...
Posted in thread: It's cold outside and I want to brew! on 11-29-2013 at 12:41 PM
-4 F here and I'm starting to crush grains. Will boil outside. This what I'll need to do to
keep a supply of Homebrew over the winter in the Adirondack Mountains.
Posted in thread: Awesome deal on LME! but a few questions on 11-02-2013 at 11:22 PM
This looks like the best price I can get for malt extract in any form. 50 lbs DME = 62.5 lbs
LME. Factoring in $20 shipping that's around $2.10/lb LME equivalent.
Posted in thread: What do you buy in bulk? on 10-20-2013 at 01:43 PM
We have a small bakery as well that we only run a couple days a week in the off season.You can
get dextrose by the 50 lb sack from your bakery supplier for around 50¢ a pound. Generally use
some in mo...
Posted in thread: oxygen canisters from home depot on 10-13-2013 at 05:02 PM
As mentioned above, here in the States you need a prescription to fill an medical tank. I use a
20 cf oxygen welding tank with a regulator designed for such from Williams. The initial layout
is more, ...
Posted in thread: Looking for more body and mouth feel on 10-08-2013 at 11:07 PM
You can also incorporate more grains that contribute unfermentable sugars such as dextrin malt,
caramel/crystal malts, biscuit, and victory malts, etc.I have a pretty good stout that is just
too thin ...
Posted in thread: M6 Oxygen Tank on 09-22-2013 at 12:17 PM
That's a medical grade tank. I don't think you will be able to get it filled without a
prescription. I have an oxygen tank for welding which I can exchange readily at a welding shop.
Posted in thread: Is this keg ok? on 09-21-2013 at 11:34 PM
Looks like it was banged up pretty good and possibly breached, then welded to seal or
reinforce. I got one like that in a batch I bought. Since I have a bunch of kegs anyway, I'll
use it as a Star-San...
Posted in thread: Albany Area Brewers on 09-21-2013 at 10:54 PM
he is the one that told me I had to discard mine because it could not be testedI also picked up
8 pin locks from them for 20 dollars for the 8, all were holding pressure they just needed a