Last Activity:07-15-2016 8:27 PM
20 Likes on 9 Posts
Posted in thread: mechanics of a Jaybird false bottom for cooler MLT on 04-02-2014 at 06:47 PM
I got around this by taking a length of 7/16" beverage tubing (gas line) and cutting a slit the
entire length. Then I put it around the circumference of my false bottom to make a "gasket".
Makes a tig...
Posted in thread: HomeBrewTalk 2014 Big Giveaway on 02-28-2014 at 09:07 PM
Count me in...
Posted in thread: Roxton Garage/Brewery build on 01-27-2014 at 10:00 PM
Here's a link to the grommet page. I used the snap-in grommets. They have many sizes available.
Just pick the size you need. The temp probe grommets were snap-in too. Just smaller. McMaster
Posted in thread: 1950s GE Fridge to Kegerator - with some mods on 10-22-2013 at 03:23 PM
I just finished refurbishing a fridge exactly like this one. I got it for free and plugged it
in and let it run for a day and it worked well. So I tore it all apart, cleaned and painted it.
I just got...
Posted in thread: I want my power to plug into my kettle, not the other way around... on 09-07-2013 at 04:38 AM
It's Kal's excellent design from his site. Here is a link. I did was change how you get power
to the elementCaseyNice work squatch!What do you have on the backside of the main wet location
box and t...
Posted in thread: I want my power to plug into my kettle, not the other way around... on 09-07-2013 at 01:41 AM
I updated my post with some pictures. Then I realized, it wouldn't bump the update. So now, I'm
Posted in thread: I want my power to plug into my kettle, not the other way around... on 09-06-2013 at 03:12 PM
I did this with my boil kettle. You can use Kal's element design and just change a few things
to achieve what you want.First, you need to use an extension ring for the two gang wet location
box that p...
Posted in thread: o2 regulator similar to rebel brewing on 08-16-2013 at 06:10 PM
Here is where I ordered mine: the one you has the connector and flow rates you need...
Posted in thread: Wort cooling water system on 08-15-2013 at 05:48 PM
Could you share a link to that harbor freight pump?
Posted in thread: Let's see your fermentation chambers for CONICALS on 07-12-2013 at 01:11 PM
Is the pipe for filling?When I build one it will either have a ramp or be ground level. Perhaps
a pull out shelf that holds the conical. not sold on cip yet.No, the pipe at the bottom of each