Last Activity:11-23-2013 7:54 PM
Likes Given: 2
4 Likes on 2 Posts
Posted in thread: Enclosure on 04-30-2013 at 03:21 AM
how many computer u.p.s. boxes (Battery back ups) have you thrown away over the years.?I've
built many projects out of those. (If you don't need rain tite)
Posted in thread: 50amp GFI keeps tripping. on 04-30-2013 at 03:07 AM
Gfci is not normally used for electronic controls because of "Leakage" I do not know what you
are running off of this. but..... That may be the issue.
Posted in thread: My 30A GFI breaker wouldn't reset, even w/ no load on 04-30-2013 at 02:59 AM
Oh. and ground fault won't always protect from arcing. Arc fault breakers do that but are only
required in bedrooms.I guess that's because that's where all the sparks are? :-)
Posted in thread: My 30A GFI breaker wouldn't reset, even w/ no load on 04-30-2013 at 02:52 AM
That clamp is called a romex clamp, and your problem is not fixed by loosening the clamp. When
that clamp was originally over-tightened the sharp metal edges on it cut through the insulation
Posted in thread: 50amp GFI keeps tripping. on 04-30-2013 at 02:38 AM
Is your neutral and ground hooked together anywhere except for your primary breaker
panel?Redundant grounds are bad and cause gfci's not to work so well.
Posted in thread: So who's worked in their main electrical panel? on 04-30-2013 at 01:55 AM
I work as a commercial high voltage electrician. 35 years or so in the biz. Been shocked a
couple times and wrecked some stuff.I work on live 480 three phase panels most every day doing
Posted in thread: No0b From Utah. on 02-17-2013 at 01:57 AM
Welcome fellow Utahn...where bouts you from?The Bullfrog side of Lake Powell.
Posted in thread: How did you find us? on 02-16-2013 at 08:31 PM
Yahoo search for Blue Moon Clone or Fat Tire Clone. (Can't remember)
Posted in thread: No0b From Utah. on 02-16-2013 at 08:03 PM
Howdy!Been lurking and learning at this forum for a few months and just decided to join up, To
get it out of the way in case I have a question or sumtin.....Really.I aint here to cause no
trouble or n...