spin02

Gift Premium Subscription To spin02

Join Date:

04-12-2009

Last Activity:

02-09-2016 1:52 PM

Likes Given: 1

    ABOUT ME

  • Cycling,Homebrew,Live Music
  • Software Development
  • Brent Dingus
  • Overmountain Brewers
  • I have been a craft beer fan since the mid-nineties, and a home brewer since 2009. I did a couple extract kits, then quickly moved to all grain. My current configuration is a Blichmann Top-Tier (10,15,20 gallon Boilermakers) and a temp controlled Blichmann conical.

    These days, I am a total beer nerd, and couldn't be happier :)
  • Belgian Pale Ale, Belgian Blond, Belgian Dubbel, Belgian Triple, Belgian Golden Strong, Belgian Dark Strong, American IPA, Brown Porter, Scottish 60
  • Danky West Coast IPA, English Mild
  • Male
  • Married
  • Lebanon
  • Virginia

LATEST ACTIVITY

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-15-2015 at 09:04 PM
    My wild guess is that your arduino isn't at /dev/ttyAMC0?Have you triedls -la /dev/tty*to see
    what other port might be available?[edit]Is it supposed to be ttyACM0, not amc0?Thanks! that
    was it.

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-15-2015 at 08:38 PM
    Thanks, i decided to update my BrewPi and i used your instructions here and it more or less
    worked. When i tried to program it though my old system didnt have an updated python, pyserial,
    and some oth...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 10:57 PM
    I thought you said you were using an Arduino Uno? Are you installing a single instance of
    BrewPI? If so, I would change to:port = autoaltport = NoneboardType = UnoThanks, Yes it is an
    uno.I have tried...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 10:26 PM
    [quote=spin02;7258918]What are you putting in the config file?scriptPath = /home/brewpi/wwwPath
    = /var/www/port = /dev/ttyACM0altport = /dev/ttyACM1boardType = leonardostartupDelay = 1.0debug
    = truevr...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 09:43 PM
    [quote=spin02;7258861]BrewPi should use the defaults.cfg file and only use the config.cfg as an
    override if you need it.This page explains it better than i can. far, unless I make a
    config.cfg file, ...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 09:10 PM
    [quote=spin02;7258795]Oops forgot its usually ACM0. That means its detecting your Arduino
    properly, what happens when you flash it? What does the log window below in the programming
    window say? Also t...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 08:39 PM
    [quote=spin02;7258696]That means your Arduino isnt being detected by the RPI. What happens if
    you do ls /dev/tty* (Thats LS lowercase) you should see a /dev/ttyUSB0 device...If you dont,
    try reflashin...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 07:50 PM
    [QUOTE=gromitdj;7258671]Have you run FixPermissions.sh?$ sudo nano
    /home/brewpi/utils/fixPermissions.shCan you start the script manually?sudo -u brewpi python
    /home/brewpi/brewpi.py[/QUOTEI did try fi...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-07-2015 at 05:47 PM
    I am in the process of installing brewpi on a Raspberry connected to Arduino Uno R3 via usb
    cable (which I have confirmed as good), no components connected to the arduino at the moment.So
    far I've bee...

  • Posted in thread: ElectricBrewingSupply 30A BCS Control Panel Giveaway! on 10-20-2014 at 07:00 PM
    yes, Please.

Following Stats
FORUM SIGNATURE
Overmountain Brewers On Deck: Big Hoppa v2.0, Traditional Porter, Scottish 60 Fermenting: On Tap: Danky West Coast IPA, Dark Sky English Mild
0 COMMENTS
POST A COMMENT