Last Activity:12-09-2013 2:03 PM
Posted in thread: Yeast starter overflow on 12-08-2013 at 04:54 PM
so i made my 2nd yeast starter for a double ipa i was going to brew today and i made it a
little bit bigger i think 1600ml and this morning when i checked it, it had overflown so i was
just curious as...
Posted in thread: sulfer SMELL on 11-27-2013 at 03:20 PM
its all good man. some yeasts produce a sulfur smell. Especially lager yeast. Just let it
ferment out and keep your beer below 70 for a little while.Ok. Thanks it really had me scared
for a while.
Posted in thread: sulfer SMELL on 11-27-2013 at 04:27 AM
brewed a HONEY WEIZEN according to norther brewers recipe and it has been in the fermentor for
2 days and im opened up the chamber and all i got was a rotten egg smell.. not sure if this is
Posted in thread: Foam from kegerator on 11-12-2013 at 04:29 PM
+1 on the 9-10 psi. I do 20psi for 24 hours when I first put the keg in and drop it to 9 or 10
psi after that. 3 days my keg starts coming to life. Rolling the keg on the floor just messes
things up ,...
Posted in thread: Foam from kegerator on 11-12-2013 at 04:14 PM
So still overcarbed. Had a friend tell me to dissconnect the gas line and keep releasing the
pressure throughout the day so im going to try that today. Still wants to serve beer with no
gas line attat...
Posted in thread: Foam from kegerator on 11-11-2013 at 03:38 AM
Alright thanks guys I will let you know what the deal is in a couole days. I really appreciate
Posted in thread: Foam from kegerator on 11-11-2013 at 03:26 AM
i stopped forever doing the roll it on the floor burst carb method.Its unreliable and just not
worth saving a couple days.Now I just use the chart and set my pressure and check until its
Posted in thread: Foam from kegerator on 11-11-2013 at 03:23 AM
Serving pressure has been 12psi about. And after rolling let it sit at 30psi for an hour then
dropped down to serving and yes released the pressure. It has currently been sitting at about
34 to 36 dag...
Posted in thread: Foam from kegerator on 11-11-2013 at 03:12 AM
Yes 30 psi and mild rolling on the floor. The beer is cold. After primary I like to drop the
temp before kegging. So if I over carbed.. is this fixable? Do I just let it sit a couple days.
It seems as...
Posted in thread: Foam from kegerator on 11-11-2013 at 02:35 AM
OK. so i have a kegerator and i just put my pale ale into a keg carbonated it and let it sit
for a while then tried to pour a beer from it.. and nothing but foam.. now i had a porter in it